MFZ Marantec Ovitor MDF 20-15-12 HD KU AWG Ø30-Drive with Safety-Brake 150Nm with Emergency Hand Crank
€996.00
Product information "MFZ Marantec Ovitor MDF 20-15-12 HD KU AWG Ø30-Drive with Safety-Brake 150Nm with Emergency Hand Crank"
Drive with integrated safety brake for use on non-balanced sectional doors or rolling doors, torque 150Nm, max. 12 rpm, hollow-shaft diameter 30mm, with emergency hand crank for manual operation, power supply 3~400V, digital limit switch AWG, limit switch range 18 rotations max.
Description:
The direct mount drive of the MDF series from MFZ Marantec Ovitor are distinguished by their compact build, which allows for the best possible installation. The maintenance-free safety brake is already integrated, offering therefore the best safety solution for the door. With a complete range from 100 to 2000 Nm, MFZ offers the right solution for every on-site situation in this field.
Features:
- Integrated safety brake, independent of position and speed, maintenance-free and wear-resistant, integrated shock-absorbers
- Self-aligning bearings
- Emergency operation with emergency hand crank (KU), also available with emergency hand chain (KE) upon request
- Easily converted from crank to chain.
- End position adjusted via electronic absolute encoder (mechanical limit switches MEC available upon request)
- Thermal protection built into the motor
- Plug-in connectors
| Emergency Operation: | Hand Crank |
|---|---|
| Hollow- / Output-Shaft (Ø): | 30 mm |
| Limit Switch type: | digital Limit Switch AWG (MFZ Marantec) |
| Limit Swtich Range: | 18 |
| Locking Torque: | 784 Nm |
| Output Speed: | 12 min^-1 |
| Output Torque: | 150 Nm |
| Power: | 0.55 kW |
| Supply Voltage: | 3~400 V |
| max. Movements per Hour: | 30 |
Login
Accessories
Radio receiver 868 MHz, 1 channels, up to 500 users, supply voltage 12/24 V ACDCDescription:JCM Technologies BASE-MN radio receiver for installation and direct connection to the control unit.Radio frequency 868 MHzCan be programmed for up to 500 hand transmitters/usersSupply voltage 12/24 V ACDC1 Relay output.
radio transmitter 868 MHz, programmable or manageable by software, range approx. 100m, power supply via 1 x 3VDC battery type CR2032, highly secure hopping code, laser engraved serial number, operating temperature -20 ... +55°CDescription:JCM Technologies GoPro Mini handheld transmitterRadio frequency 868 MHzPower supply with 1 x 3 VDC batteries type CR2032highly secure hopping-codeRange approx. 100m
Optical sensing edge set for industrial doors, contains: FRABA VITECTOR OSE optical sensing edge set (cable length 10,5m/ 0,5m), 5m rubber profile FRABA VITECTOR OSE-P 25 75 01, 2 pcs. bumper OSE-B 5518, IP65 electrical box, coil cord 5x0,25mm², mounting bracket for coil cord incl. bend protectionDescription:The FRABA VITECTOR OSE sensing edge set with installation equipment and a 5m rubber profile contains all the components necessary to mount an optical sensing edge to an industrial door. The set contains:An optical sensing edge set OSE-S 6502 to secure industrial doors in automatic mode.- Type: FRABA VITECTOR OSE- Transmitter (10.5m cable) and receiver (0.5m cable) in the setThe OSE-P 25 75 01 rubber profile in a 5m roll- 25mm wide and 75mm high- with sealing lip The FRABA VITECTOR OSE-B 5518 Bumper (2 pcs.) suitable OSE-P 25 75 01 rubber profilesAccessories for connecting the optical sensing edge on the door leaf to the control unit. - junction box with M16 bend protector- Coil cord 5x0,25 mm² with a max. extension length of 3.5m- Mounting bracket for the coil cord, angled and with M16 bend protection.
Motor cable for MDF 20 and MDF 30 drives up to 420Nm, length 5m
Door control unit for MFZ/Ovitor drives with digital limit switch AWG or mechanical limit switch, in PVC-housingDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Other customers also bought
Radio receiver 868 MHz, 1 channels, up to 500 users, supply voltage 12/24 V ACDCDescription:JCM Technologies BASE-MN radio receiver for installation and direct connection to the control unit.Radio frequency 868 MHzCan be programmed for up to 500 hand transmitters/usersSupply voltage 12/24 V ACDC1 Relay output.
radio transmitter 868 MHz, programmable or manageable by software, range approx. 100m, power supply via 1 x 3VDC battery type CR2032, highly secure hopping code, laser engraved serial number, operating temperature -20 ... +55°CDescription:JCM Technologies GoPro Mini handheld transmitterRadio frequency 868 MHzPower supply with 1 x 3 VDC batteries type CR2032highly secure hopping-codeRange approx. 100m
Optical sensing edge set for industrial doors, contains: FRABA VITECTOR OSE optical sensing edge set (cable length 10,5m/ 0,5m), 5m rubber profile FRABA VITECTOR OSE-P 25 75 01, 2 pcs. bumper OSE-B 5518, IP65 electrical box, coil cord 5x0,25mm², mounting bracket for coil cord incl. bend protectionDescription:The FRABA VITECTOR OSE sensing edge set with installation equipment and a 5m rubber profile contains all the components necessary to mount an optical sensing edge to an industrial door. The set contains:An optical sensing edge set OSE-S 6502 to secure industrial doors in automatic mode.- Type: FRABA VITECTOR OSE- Transmitter (10.5m cable) and receiver (0.5m cable) in the setThe OSE-P 25 75 01 rubber profile in a 5m roll- 25mm wide and 75mm high- with sealing lip The FRABA VITECTOR OSE-B 5518 Bumper (2 pcs.) suitable OSE-P 25 75 01 rubber profilesAccessories for connecting the optical sensing edge on the door leaf to the control unit. - junction box with M16 bend protector- Coil cord 5x0,25 mm² with a max. extension length of 3.5m- Mounting bracket for the coil cord, angled and with M16 bend protection.
Motor cable for MDF 20 and MDF 30 drives up to 420Nm, length 5m
Door control unit for MFZ/Ovitor drives with digital limit switch AWG or mechanical limit switch, in PVC-housingDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.