GfA Elektromaten TS 96.25 Door Control Unit

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 6,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6501 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 6.5 m and receiver - 0.5m). The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 0,5m/0,5m, with Molex-plugsDescription:The FRABA VITECTOR OSE-S 6600 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 0.5 m and receiver - 0.5 m) and pre-assembled GfA plugs. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Pull-in protection for doors, set includes: 1x IR transmitter, 1x receiver with 10,5m cable each, mounting brackets and screwsDescription:The safety light barrier RAYTECTOR from FRABA Vitector can be used in rolling grill doors as pull-in protection. The light barrier is constructed in such a way that it will reliably detect when there is interference by outside light, whenever a light beam is broken, or when an electrical component fails (including the connection to the monitoring unit). A two-coloured LED shows the various operating modes clearly on the front part of the receiver. The set, made up of sender and receiver, is delivered with a mounting bracket for easy alignment and simple installation on rolling grill doors.Properties:- Compatible with FRABA OSE interface- LED indicator to help alignment of transmitter and receiver- Mounting bracket for easy alignment- Range 1.5m – 10m- Protection class: IP68

Cable set for optical sensing edges OSE, includes coil cord 4x0,25 mm², cable ends 2,0m/ 0,35m, max. extension length 3,5m, with junction box and connection PCBDescription:The cable set for optical sensing edges consists of:- Pluggable 4-core coil cord, straight cable ends 2,0m/ 0,35m length, can be extended to a max. length of 3,5m - pre-assembled plug for connecting to GfA Elektromaten door control units- IP65 junction box with plug-in connector for OSE transmitter / receiver as well as pass-door and slack-door switches.

With pluggable mains supply cable of length 0.7m. Compatible with TS 91.11, TS 92.12, TS 93.13/93.25, TS 95.25, TS 96.25

Separate connection kit for GfA Elektromaten door controls type TS-C, for direct wiring. Compatible with TS 91.11, TS 92.12, TS 93.13/93.25, TS 95.25, TS 96.25

Keypad Cover for GfA Elektromaten controls type TS-C, for preventing unintentional pressing of keypad buttons (e.g. for use in underground car parks), increased protection against direct contact with water. Compatible with TS 91.11, TS 92.12, TS 93.13/93.25, TS 95.25, TS 96.25

Radio transmitter SKX1GS by GfA Elektromaten, 1-channel, 434 MHz, coded via dip-switch, includes 12V battery, Status LEDDescription:GfA Elektromaten radio transmitter SKX1GS.Technical characteristics:434 MHzcoded via dip-switchincludes 12V batteryLED status display

Midi radio transmitter SKX1LC by GfA Elektromaten, 1-channel, 434 MHz, coded via dip-switch, includes 12V battery, status LEDDescription:GfA Elektromaten SKX1LC Midi radio transmitter.Technical characteristics:434 MHzcoded via dip-switchincludes 12V batteryLED status display

Wireless transmission system for sensing edges, pedestrian door switches and cable tension switches, works in combination with the GfA Elektromaten door control unit TS971. Frequency 2,4 GHz, in IP65 rated enclosure, incl. Battery

Coil cord for doors, EstTPU/PP, black, cable configuration: fine-stranded 5x0,25mm²,  Lif9Y11Y, dimensions: left end = 300mm, coil length = 900mm, right end = 2000mm, max. extension length 3,5m   Description: The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf. Properties: Due to the 800mm-long spiral block, the coil cable can be extended to a length of up to 3.5m. The 5-core cable installation and a 0.25mm² conductor cross-section means the helical cable has enough strands for e.g. the safety edge and slack-rope switches Sheath and core insulation made of high-grade materials Can be installed universally on doors from various manufacturers

The VTX2 remote control from doorautomation24 combines modern design and reliable performance in a compact format. Equipped with a robust plastic housing, the remote control offers excellent functionality and is the perfect choice for the control of various devices. The high-quality workmanship and strong radio parameters of the VTX ensure reliable and convenient use. The remote controls of the VTX series are compatible with the radio receiver VRX150 from doorautomation24 and the integrated radio receiver of the door control unit TS971 from GfA Elektromaten. The integration into the existing door control unit TS971 is simple and is explained step by step in the document available under ‘Download’. Important features: Design: Robust plastic housing for long-lasting use Compatibility: Fully compatible with the VRX150 receiver from doorautomation24 and the TS971 from GfA Elektromaten Range, coverage: Stable radio range of up to 150 metres Security: KeeLoq® rolling code for high security with 4,294,967,296 possible combinations User-friendly: powered by 2 standard CR2016 batteries (included)   Important information for use with the TS971 from GfA Elektromaten: To teach the remote control to the door control unit, the remote control must be programmed using the corresponding parameter of the door control unit. To do this, the installer must have access to the control unit programming.