Sommer GIGAcontrol A R3 Door Control Relay-Version IP65
€375.00
Product information "Sommer GIGAcontrol A R3 Door Control Relay-Version IP65"
Universal control unit for industrial doors by Sommer, for Sommer drives with electronic limit switch, for drives with all types of mechanical limit switches and for electronic limit switches by other manufacturers, relay-version up to 1,5kW, protection class IP65, power supply 1/3~AC 230V oder 3~AC 400V
| Additional Functions: | Partial Opening, Timer-to-Close |
|---|---|
| Max. Operating Temperature: | +65 °C |
| Min. Operating Temperature: | -25 °C |
| Modes of Operation: | Automatic, Hold-to-Run |
| Programmable Relay Contact: | 3 |
| Protection Class: | IP 65 |
| Radio Function: | Optional |
| Sensor Inputs: | Airwave Switch, Optical Sensing Edges, Photo Eye, Pull-In Protection, Resistive Sensing Edge (8k2) |
| Supply Voltage: | 1N~230 V, 3N~400 V, 3~230 V |
| Switching power: | 1.5 kW |
Login
Other customers also bought
Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 6,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6501 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 6.5 m and receiver - 0.5m). The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.
Pull-switch with spring-supported rope, rope length 2,5m with rubber ball at the end, IP67 rating, with 3 cable entry openings M20x1,5, special switch design allows installation on the wall or ceiling without a need for additional installation equipmentDescription:The pull switch is ideal for ceiling or wall installationsIP 67 protection ratingIncludes 2.5m cord
reflective photo eye, max. range 9m, supply voltage 24 ... 240 V AC/ 12 ... 240 V DC, signal output: changeover relay, IP67 rated, 2m connection cableDescription:Universal Reflective Photo-eye barrier for contactless protection of industrial doors. The light barrier works on an extremely wide supply voltage range and through the execution of the output signal as a changeover relay (Normally Closed Contact and Normally Open Contact), it is compatible with most door control units.The photo-eye sensor works with visible red lights (630nm wavelength) and has a built-in polarisation filter. Through this, the photo-eye sensor is extremely impervious to external light and is easy to install.Coverage up to 9mUniversal power supply voltage AC 24 to 240V, DC 12 to 220V2m connection leadRelay output (changeover)
Coil cord for doors, EstTPU/PP, black, cable configuration: fine-stranded 5x0,25mm², Lif9Y11Y, dimensions: left end = 300mm, coil length = 900mm, right end = 2000mm, max. extension length 3,5m Description: The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf. Properties: Due to the 800mm-long spiral block, the coil cable can be extended to a length of up to 3.5m. The 5-core cable installation and a 0.25mm² conductor cross-section means the helical cable has enough strands for e.g. the safety edge and slack-rope switches Sheath and core insulation made of high-grade materials Can be installed universally on doors from various manufacturers
Electrical box with status LED, 40 x 136 x 56 mm, incl. 3x M16 cable glands, 1x M16 cable gland with bend protection and 4x M16 lock nutDescription:The Fraba Vitector large junction box is useful wherever lots of space is needed for cabling from sensors, photo-eye switches, pass-door switches, slack-rope switches, etc. The connection circuit board ensures the cables can be easily connected to the door.Further characteristics:Dimensions: 40 x 136 x 56 mmTransparent coverPre-punched cable entries 5xM16 in the housing, 1xM16 in the lidIncludes 3xM16 cable glands, 1x bend protector and 4 x locknuts
Spare parts
display, for GIGAcontrol A, with connection cable
3-button silicone pad, for industrial door controler, replacement for GIGAcontrol A, T, TA
Mainboard for GIGAcontrol A R3, automatic control board up to 1,5kW, for 400V and freq. converter operators, until 2017
Mainboard for GIGAcontrol A R3, automatic control board up to 1,5 kW, for 400V and freq. converter operators, from 2018#
Accessories
radio transmitter 868 MHz, programmable or manageable by software, range approx. 100m, power supply via 1 x 3VDC battery type CR2032, highly secure hopping code, laser engraved serial number, operating temperature -20 ... +55°CDescription:JCM Technologies GoPro Mini handheld transmitterRadio frequency 868 MHzPower supply with 1 x 3 VDC batteries type CR2032highly secure hopping-codeRange approx. 100m
Radio receiver 868 MHz, 1 channels, up to 500 users, supply voltage 12/24 V ACDCDescription:JCM Technologies BASE-MN radio receiver for installation and direct connection to the control unit.Radio frequency 868 MHzCan be programmed for up to 500 hand transmitters/usersSupply voltage 12/24 V ACDC1 Relay output.
Foot and Palm Switch/ Mushroom Pushbutton, XL button diameter 94mm, IP65, blackDescription:The Foot or Palm Switch, Mushroom Pushbutton with extra large 94mm button is optimally suited for use in industrial environments.Properties:Contact type impulse, Normally Open NO and Normally Closed NCExtra large button diameter 94mmcolour blackProtection Class IP65
Foot and Palm Switch/ Mushroom Pushbutton, XL button diameter 94mm, IP65, redDescription:The Foot or Palm Switch, Mushroom Pushbutton with extra large 94mm button is optimally suited for use in industrial environments.Properties:Contact type impulse, Normally Open NO and Normally Closed NCExtra large button diameter 94mmcolour redProtection Class IP65
Key-switch in wall-mount aluminium enclosure, IP55 rating, 2-sided impulse switch, up/ down function, with cylinder lock and 3 keysDescription:Key-switch in wall-mount aluminium housing IP55 ratingimpulse switchwith cylinder lock and 3 keysavailable in various designs
Pull-switch with spring-supported rope, rope length 2,5m with rubber ball at the end, IP67 rating, with 3 cable entry openings M20x1,5, special switch design allows installation on the wall or ceiling without a need for additional installation equipmentDescription:The pull switch is ideal for ceiling or wall installationsIP 67 protection ratingIncludes 2.5m cord
reflective photo eye, max. range 9m, supply voltage 24 ... 240 V AC/ 12 ... 240 V DC, signal output: changeover relay, IP67 rated, 2m connection cableDescription:Universal Reflective Photo-eye barrier for contactless protection of industrial doors. The light barrier works on an extremely wide supply voltage range and through the execution of the output signal as a changeover relay (Normally Closed Contact and Normally Open Contact), it is compatible with most door control units.The photo-eye sensor works with visible red lights (630nm wavelength) and has a built-in polarisation filter. Through this, the photo-eye sensor is extremely impervious to external light and is easy to install.Coverage up to 9mUniversal power supply voltage AC 24 to 240V, DC 12 to 220V2m connection leadRelay output (changeover)
Coil cord for doors, EstTPU/PP, black, cable configuration: fine-stranded 5x0,25mm², Lif9Y11Y, dimensions: left end = 300mm, coil length = 900mm, right end = 2000mm, max. extension length 3,5m Description: The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf. Properties: Due to the 800mm-long spiral block, the coil cable can be extended to a length of up to 3.5m. The 5-core cable installation and a 0.25mm² conductor cross-section means the helical cable has enough strands for e.g. the safety edge and slack-rope switches Sheath and core insulation made of high-grade materials Can be installed universally on doors from various manufacturers
Electrical box with status LED, 40 x 136 x 56 mm, incl. 3x M16 cable glands, 1x M16 cable gland with bend protection and 4x M16 lock nutDescription:The Fraba Vitector large junction box is useful wherever lots of space is needed for cabling from sensors, photo-eye switches, pass-door switches, slack-rope switches, etc. The connection circuit board ensures the cables can be easily connected to the door.Further characteristics:Dimensions: 40 x 136 x 56 mmTransparent coverPre-punched cable entries 5xM16 in the housing, 1xM16 in the lidIncludes 3xM16 cable glands, 1x bend protector and 4 x locknuts
Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 6,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6501 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 6.5 m and receiver - 0.5m). The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.
tripple push-button, wall-mount, UP/ DOWN/ STOP impulse switch
Push-button, wall-mount, emergency stop switch
Mains switch, wall-mount, 4 pole/ 20A, IP65 ratedDescription:This Main Switch comes in a wall-mount enclosure with IP65 rating and is used to disconnect the power from components with a 3-phase power supply (400 V). A common use is for longer shutdown periods or for shutting down at the end of the day and on weekends.