D+H RZN 4503-T RWA push-button control unit set 3 A, orange
€960.00
Product information "D+H RZN 4503-T RWA push-button control unit set 3 A, orange"
The D+H RZN 4503-T Set is a complete smoke and heat exhaust ventilation (RWA) set for the rapid installation of a smoke and heat exhaust ventilation system. It consists of the RWA push-button control unit RZN 4503-T, an RT 45 RWA push-button, the SD-O 371 smoke detector and a Type 8 battery for the integrated 72-hour emergency power supply. All components are perfectly matched to one another and enable quick and safe installation.
The RWA push-button control unit features an integrated RWA main control panel and a ventilation push-button within a robust aluminium housing. With an output of 24 V DC / 3 A, a detector loop and a drive unit, the set is ideally suited for smaller smoke and heat extraction systems in public, commercial and industrial buildings.
The control unit provides a stabilised output voltage and offers numerous safety and convenience features. These include circuit monitoring for short circuits and open circuits, remote reset of smoke detectors, RWA delayed activation, and connection options for visual and audible alarm devices. An optional wind or rain sensor can be connected directly. In addition, two freely programmable potential-free signal contacts and a slot for an optional add-on module are available.
The D+H RZN 4503-T is certified in accordance with ISO 21927-9, DIN EN 12101-10, VdS 2581, VdS 2593, VdS 2344 and the building regulations requirements of DIN 18232-9.
Features
Complete smoke and heat extraction (RWA) kit with coordinated components
RWA push-button control unit RZN 4503-T with integrated main control panel and ventilation push-button
Output power: 24 V DC / 3 A
1 detector line and 1 actuator group
Robust aluminium housing with lockable door
Temperature-controlled battery charging with charge and status indicator
Slot for optional add-on module for comfort ventilation
Direct connection of a wind or rain sensor
Two freely programmable potential-free signal contacts
Includes RT 45 smoke and heat alarm push-button
Includes SD-O 371 smoke detector
Includes Type 8 rechargeable battery for 72-hour emergency power supply
Tested and certified in accordance with DIN EN 12101-10, ISO 21927-9 and VdS
Technical data
Supply voltage: 230 V AC, 50 Hz
Power consumption: 100 VA
Standby power consumption: < 5 W
Output: 24 V DC / 3 A
Residual ripple: < 0.5 mVss
Monitoring operating mode: Continuous operation
Alarm/ventilation operating mode: Short-term operation (30% duty cycle)
Circuits: 1
Drive groups: 1
Protection rating: IP30
Ambient temperature: -5 °C to +40 °C
Housing: Aluminium
Colour: Orange (similar to RAL 2011)
Dimensions (W × H × D): 156 × 235 × 82 mm
Contents of delivery
D+H RZN 4503-T smoke and heat alarm push-button control unit
RT 45 smoke and heat alarm push-button
SD-O 371 smoke detector
1 × Type 8 rechargeable battery
Lockable flush-mounted aluminium housing with spare key
Labelling set in 32 languages
Note: The smoke and heat extraction set contains all the essential components for installing a single-circuit smoke and heat extraction system. Actuators and other accessories are not included in the scope of delivery and must be ordered separately if required.
Login
Other customers also bought
The D+H LT 84-U-SD is a ventilation push-button switch for the manual control of 24 V DC ventilation units. It is suitable for installation in standard 55 mm flush-mounted boxes and enables convenient operation of ventilation drives via the functions OPEN, STOP and CLOSED.The dual-button switch features two non-latching normally open contacts and is fitted with an integrated LED indicator for the OPEN position. This allows the current switching status to be identified quickly and unambiguously. The simple design blends harmoniously into existing switch ranges.With its robust plastic housing, the ventilation push-button switch is suitable for use in public, commercial and industrial buildings and is the ideal complement to D+H ventilation control systems.FeaturesVentilation push-button switch for 24 V DC ventilation groupsFlush-mounted version for 55 mm junction boxesFunctions: OPEN, STOP and CLOSEDouble-push button with two non-latching normally open contactsIntegrated LED indicator for the OPEN positionRobust plastic housingSimple and convenient operationTechnical dataInput voltage: 24 V DCProtection class: IP20Housing: PlasticColour: WhiteDimensions (W × H): 80 × 80 mmContents of deliveryD+H LT 84-U-SD ventilation push-button switch
The D+H RT 46 is a smoke and heat extraction system control unit for the manual activation and reset of smoke and heat extraction systems (RWA). In the event of a fire, it enables the reliable activation of the smoke and heat extraction system and can be used as both a main and a secondary control unit.The high-quality polycarbonate housing is designed for surface-mounted installation and impresses with its high-quality finish and durable construction. The control unit has been developed in accordance with pr EN 12101-9 and VdS 2592 and thus meets the requirements for modern smoke and heat extraction systems.The integrated buttons allow the functions RWA OPEN and RWA Reset to be operated conveniently. LED indicators provide information at all times regarding operational readiness, a triggered smoke and heat extraction alarm, and any faults that may be present.FeaturesSmoke and heat extraction control panel for the manual triggering of smoke and heat extraction systemsSuitable as a main or secondary control unitSurface-mounted installationHigh-quality polycarbonate housingFunctions: RWA OPEN and RWA ResetStatus indicators for operational readiness, smoke and heat extraction alarm and faultDeveloped in accordance with pr EN 12101-9 and VdS 2592Lockable versionTechnical dataSupply voltage: 24 V DC (18–28 V DC)Protection class: IP40Ambient temperature: -5 °C to +40 °CHousing: polycarbonate (surface-mounted)Colour: Orange (RAL 2011)Dimensions (W × H × D): 129 × 135 × 39 mmScope of supplyD+H RT 46 RWA control unitLockable housing with control unitStrike plateKeyLabelling sheet in 32 languages
The D+H SD-O 371 is an optical smoke detector based on the tried-and-tested scattered light principle for reliable fire detection in smoke and heat extraction systems (RWA). It detects emerging smoke particles at an early stage and, in the event of a fire, triggers the connected RWA control unit. Thanks to its high reliability, the detector is suitable for use in public, commercial and industrial buildings.The smoke detector features automatic self-monitoring, which continuously checks its function and operating status. An integrated alarm LED clearly indicates when the detector has been triggered. Thanks to automatic background level compensation, contamination is counteracted, ensuring consistently reliable detection.Installation is quick and easy using the detector base supplied. The SD-O 371 meets the requirements of EN 54-7 and has VdS approval, making it ideally suited for use in D+H smoke and heat extraction systems.FeaturesOptical smoke detector based on the scattered light principleAutomatic self-monitoring of function and operating statusAlarm indication via red LEDAutomatic background level adjustmentEasy installation thanks to a removable detector baseMonitoring area up to 110 m²Monitoring height up to 12 mCertified to EN 54-7VdS-approved (G 213066)Technical specificationsRated voltage: 24 V DCDetection area: max. 110 m²Detection height: max. 12 mAlarm indicator: Red LEDAir velocity: 0 to 25.4 m/sTemperature range: -20 °C to +72 °CHumidity: ? 95 %Protection class: IP40Terminal blocks: 0.6 mm Ø to 2 mm²Housing: ABSColour: White (similar to RAL 9010)Specification: EN 54-7VdS approval: G 213066Scope of supplyD+H SD-O 371 smoke detectorDetector base
The D+H WRS-S is a combined wind and rain sensor for weather-dependent control of ventilation dampers in conjunction with D+H control units and 24 V DC systems. It monitors both precipitation and wind speed and facilitates the automatic closure of connected ventilation elements in the event of adverse weather conditions.The wind activation threshold can be set via DIP switches within a range of 1 m/s to 30 m/s. The rain signal is stored for approx. 5 minutes, as is the wind signal. This prevents erratic opening and closing during sudden changes in weather.The heated sensor surface ensures reliable rain detection. With its compact plastic housing and IP44 protection rating, the WRS-S is ideally suited for automatic, weather-dependent ventilation control.FeaturesCombined wind and rain sensor for 24 V DC systemsFor weather-dependent control of ventilation dampersHeated sensor surface for reliable rain detectionWind switching threshold adjustable via DIP switchesWind switching threshold adjustment range: 1 to 30 m/sRain signal is stored for approx. 5 minutesWind signal is stored for approx. 5 minutesCompact plastic housingProtection class IP44Technical dataPower supply: 24 V DC / 0.09 AProtection class: IP44Temperature range: -30 °C to +50 °CHousing: PlasticDimensions (W × H × D): 96 × 77 × 118 mmWeight: 0.18 kgContents of deliveryD+H WRS-S wind and rain sensor
Alternative article
The D+H CPS-B1-2.5-0101 is a compact smoke and heat extraction (RWA) control unit from the Basic series. With an output of 24 V DC / 2.5 A, one detector line and one actuator group, it is ideally suited for small to medium-sized smoke and heat extraction systems in public, commercial and industrial buildings. The control unit provides a stabilised 24 V output voltage and features an integrated emergency power supply for up to 72 hours (with separately available rechargeable batteries). Up to 8 smoke and heat extraction control points and 8 approved fire detectors can be connected per line. In addition to standard smoke and heat extraction functions, the control unit offers numerous safety and convenience features. These include circuit monitoring for short circuits and open circuits, remote reset of smoke detectors, smoke and heat extraction night-time operation, and switchable safety functions. Furthermore, the control unit can be used for daily comfort ventilation. The ventilation time can be set directly on the control unit. A wind or rain sensor can be connected directly without the need for additional extensions. The D+H CPS-B1-2.5-0101 meets the requirements of modern smoke extraction systems and is certified in accordance with ISO 21927-9, DIN EN 12101-10, VdS 2581, VdS 2593, VdS 2344, EN 62368-1 and the building regulations requirements of DIN 18232-9. Features Basic smoke and heat extraction control unit for 24 V DC systems Output power: 2.5 A 1 detector line and 1 actuator group Includes plastic housing with spare key Integrated emergency power supply for 72 hours (batteries available separately) Comfort ventilation function with adjustable ventilation time Connection for wind and rain sensor Circuit monitoring for short circuits and open circuits Remote reset of smoke detectors and night-time activation of smoke and heat extraction systems Tested and certified in accordance with DIN EN 12101-10, ISO 21927-9 and VdS Technical data Supply voltage: 195–253 V AC, 50 Hz Power consumption: 140 VA Standby power consumption: < 2 W Output: 24 V DC / 2.5 A Monitoring operating mode: Continuous operation Alarm/ventilation operating mode: Short-term operation (30 % duty cycle) Channels: 1 Drive groups: 1 Protection class: IP30 Ambient temperature: -5 °C to +40 °C Housing: Plastic Colour: White (similar to RAL 9016) Dimensions (W × H × D): 310 × 310 × 104 mm Scope of delivery D+H CPS-B1-2.5-0101 main circuit board Plastic housing Spare key Excludes rechargeable batteries (rechargeable batteries must be ordered separately) Note: Two suitable rechargeable batteries are required for operation. These are not included in the scope of delivery and must be ordered separately.
The D+H CPS-B1-5-0101 is a high-performance smoke and heat extraction (RWA) control unit from the Basic series. With an output of 24 V DC / 5 A, one detector line and one actuator group, it is ideally suited for small to medium-sized smoke and heat extraction systems with increased power requirements. It ensures reliable control of the connected smoke and heat extraction systems and can also be used for daily comfort ventilation.The control unit provides a stabilised 24 V output voltage and features an integrated emergency power supply for up to 72 hours (with separately available rechargeable batteries). Up to 8 RWA control points and 8 approved fire detectors can be connected per line.In addition to standard smoke and heat extraction functions, the control unit offers numerous safety and convenience features. These include circuit monitoring for short circuits and open circuits, remote reset of smoke detectors, an integrated smoke and heat extraction night-time operation mode, and switchable safety functions. Furthermore, visual and audible alarm devices can be connected. An optional wind or rain sensor can be connected directly to the control unit.The D+H CPS-B1-5-0101 meets the requirements of modern smoke and heat extraction systems and is certified to ISO 21927-9, DIN EN 12101-10, VdS 2581, VdS 2593, VdS 2344, EN 62368-1 and the building regulations requirements of DIN 18232-9.FeaturesBasic smoke and heat extraction control unit for 24 V DC systemsOutput power: 5 A1 detector line and 1 actuator groupIncludes plastic housing with spare keyIntegrated emergency power supply for at least 72 hours (batteries available separately)Convenience ventilation function with adjustable ventilation timeDirect connection of a wind or rain sensor possibleCircuit monitoring for short circuits and open circuitsRemote reset of smoke detectors and RWA night-time activationConnection options for visual and audible alarm devicesTested and certified in accordance with DIN EN 12101-10, ISO 21927-9 and VdSTechnical dataSupply voltage: 195–253 V AC, 50 HzPower consumption: 145 VAStandby power consumption: < 2 WOutput: 24 V DC / 5 AMonitoring operating mode: Continuous operationAlarm/ventilation operating mode: Short-term operation (30 % duty cycle)Channels: 1Drive groups: 1Protection class: IP30Ambient temperature: -5 °C to +40 °CHousing: PlasticColour: White (similar to RAL 9016)Dimensions (W × H × D): 310 × 310 × 104 mmContents of deliveryD+H CPS-B1-5-0101 central circuit boardPlastic housingSpare keyExcludes rechargeable batteries (rechargeable batteries must be ordered separately)Note: Two type 8 rechargeable batteries are required for operation. These are not included in the scope of delivery and must be ordered separately.
The D+H CPS-P1-010-0101-B is a compact smoke and heat extraction control unit for controlling 24 V DC smoke and heat extraction systems. With an output of 24 V DC / 10 A, a detector line and a motor group, it is suitable for smoke extraction and daily ventilation. The integrated emergency power supply ensures reliable operation even in the event of a mains power failure.The control unit supplies an actuator group with up to 10 A. Up to 8 smoke and heat extraction control points and 14 approved fire detectors can be connected per line. Parameterisation is carried out via DIP switches. Features such as line monitoring, dual smoke detector interdependence, RWA night-time operation, comfort ventilation, as well as connections for wind and rain sensors and alarm devices are included.The D+H CPS-P1-010-0101-B meets the requirements of modern smoke and heat extraction systems and is certified in accordance with ISO 21927-9, DIN EN 12101-10, VdS 2581, VdS 2593, VdS 2594, VdS 2344 and the building regulations set out in DIN 18232-9.FeaturesCompact smoke and heat extraction control unit for 24 V DC systemsOutput power: 10 A1 detector line and 1 actuator group72-hour emergency power supply (batteries available separately)Configuration via DIP switchesCircuit monitoring and dual smoke detector interdependenceComfort ventilation functionsConnection for wind and rain sensorsTested in accordance with DIN EN 12101-10, ISO 21927-9 and VdSTechnical dataSupply voltage: 230 V AC, 50 HzPower consumption: 290.7 VAStandby power consumption: < 5 WOutput: 24 V DC / 10 AResidual ripple: < 5 %Protection rating: IP54 (VdS IP30)Ambient temperature: -5 °C to +40 °CHousing: PlasticColour: Light grey (similar to RAL 7035)Dimensions (W × H × D): 300 × 350 × 165 mmBattery type: 2 × Type 18Contents of deliveryD+H CPS-P1-010-0101-B central circuit boardLockable plastic housing with keyWired switching power supplyBatteries not included (Batteries must be ordered separately)
The D+H CPS-P1-020-0202-B is a high-performance smoke and heat extraction control unit for controlling 24 V DC smoke and heat extraction systems. With an output of 24 V DC / 20 A, two detector lines and two actuator groups, it is suitable for larger smoke extraction systems with multiple fire compartments. The integrated emergency power supply and comprehensive smoke and heat extraction and ventilation functions ensure reliable operation.The control unit supplies each drive group with up to 20 A. Up to 8 smoke and heat extraction control points and 14 approved fire detectors can be connected per line. Parameterisation is carried out via DIP switches. Features such as cable monitoring, dual smoke detector interlock, smoke and heat extraction post-operation, comfort ventilation and connections for wind and rain sensors are included.The D+H CPS-P1-020-0202-B meets the requirements of modern smoke and heat extraction systems and is certified in accordance with ISO 21927-9, DIN EN 12101-10, VdS 2581, VdS 2593, VdS 2594, VdS 2344 and the building regulations set out in DIN 18232-9.FeaturesCompact smoke and heat extraction control unit for 24 V DC systemsOutput power: 20 A2 detector lines and 2 actuator groups72-hour emergency power supply (batteries available separately)Configuration via DIP switchesCircuit monitoring and dual smoke detector interdependenceComfort ventilation functionsConnection for wind and rain sensorsTested in accordance with DIN EN 12101-10, ISO 21927-9 and VdSTechnical dataSupply voltage: 230 V AC, 50 HzPower consumption: 550 VAStandby power consumption: < 5 WOutput: 24 V DC / 20 AMonitoring operating mode: Continuous operationAlarm/ventilation operating mode: Short-term operation (30% duty cycle)Lines: 2Drive groups: 2Protection rating: IP54Ambient temperature: -5 °C to +40 °CHousing: PlasticColour: Light grey (similar to RAL 7035)Dimensions (W × H × D): 400 × 500 × 245 mmScope of supplyD+H CPS-P1-020-0202-B central circuit boardLockable plastic housing with keyWired switching power suppliesTerminal blocks for mains connectionWithout rechargeable batteries (rechargeable batteries must be ordered separately)
The D+H CPS-P1-040-0202-B is a high-performance smoke and heat extraction control unit for controlling 24 V DC smoke and heat extraction systems. With an output of 24 V DC / 40 A, two detector lines and two actuator groups, it is suitable for larger smoke extraction systems with high power requirements. The integrated emergency power supply and comprehensive smoke and heat extraction and ventilation functions ensure reliable operation.The control unit provides a total of 40 A of output power, with each drive group capable of handling up to 20 A. Up to 8 smoke and heat extraction control points and 14 approved fire detectors can be connected per line. Parameterisation is carried out via DIP switches. Features such as cable monitoring, dual smoke detector interlock, smoke and heat extraction night-time operation, comfort ventilation and connections for wind and rain sensors are included.The D+H CPS-P1-040-0202-B meets the requirements of modern smoke and heat extraction systems and is certified in accordance with ISO 21927-9, DIN EN 12101-10, VdS 2581, VdS 2593, VdS 2594, VdS 2344 and the building regulations set out in DIN 18232-9.FeaturesCompact smoke and heat extraction control unit for 24 V DC systemsTotal output power: 40 A2 detector lines and 2 actuator groups72-hour emergency power supply (batteries available separately)Configuration via DIP switchesCircuit monitoring and dual smoke detector interlockComfort ventilation functionsConnection for wind and rain sensorsTested in accordance with DIN EN 12101-10, ISO 21927-9 and VdSTechnical dataSupply voltage: 230 V AC, 50 HzPower consumption: 1010 VAStandby power consumption: < 6 WOutput: 24 V DC / 40 AMonitoring operating mode: Continuous operationAlarm/ventilation operating mode: Short-term operation (30% duty cycle)Lines: 2Drive groups: 2Protection rating: IP54Ambient temperature: -5 °C to +40 °CHousing: PlasticColour: Light grey (similar to RAL 7035)Dimensions (W × H × D): 400 × 500 × 245 mmScope of supplyD+H CPS-P1-040-0202-B central circuit boardLockable plastic housing with keyWired switching power suppliesTerminal blocks for mains connectionWithout rechargeable batteries (rechargeable batteries must be ordered separately)
The D+H RZN 4503-T is a compact smoke and heat extraction push-button control unit with an integrated main control panel and ventilation push-buttons in a robust aluminium housing. With an output of 24 V DC / 3 A, one detector line and one actuator group, it is ideal for compact smoke and heat extraction systems where control unit and operating panel are combined in one device.The unit provides a stabilised output voltage and an integrated emergency power supply for at least 72 hours (battery sold separately). Up to 8 smoke and heat extraction control panels and 14 approved fire detectors can be connected. Temperature-controlled battery charging, circuit monitoring, remote smoke detector reset and night-time smoke extraction functions ensure reliable operation.An optional add-on module enables comfort ventilation with adjustable opening width and ventilation time. Wind or rain sensors, visual and audible alarm devices, and two freely programmable potential-free signal contacts can also be connected.FeaturesSmoke and heat extraction push-button control unit with integrated main control panel24 V DC / 3 A output1 detector line and 1 actuator groupLockable aluminium housing72-hour emergency power supply (battery sold separately)Supports up to 8 control panels and 14 fire detectorsOptional comfort ventilation moduleDirect connection for wind or rain sensorTwo programmable potential-free signal contactsRemote smoke detector reset and night-time smoke extractionCertified to DIN EN 12101-10, ISO 21927-9 and VdS standardsTechnical dataSupply voltage: 230 V AC, 50 HzPower consumption: 100 VAStandby power consumption: < 5 WOutput: 24 V DC / 3 AProtection rating: IP30Ambient temperature: -5 °C to +40 °CHousing: AluminiumColour: Orange (similar to RAL 2011)Dimensions (W × H × D): 156 × 235 × 82 mmScope of supplyD+H RZN 4503-T control unit in flush-mounted aluminium housingLockable door with spare key32-language labelling setWithout battery (must be ordered separately)