ASO Safety Edge Profile Sentir Edge 30.70 TT Roll 30m
€1,243.00
Product information "ASO Safety Edge Profile Sentir Edge 30.70 TT Roll 30m"
Profile for sensing edge SENTIR Edge 30.70 TT by ASO Safety, width 30mm, height 70mm, roll of 30m
Description:
The Plug’N’Sense System allows easy assembly of the SENTIR Edge 30.70 TT contact edges by ASO Safety. No additional adhesive or other assembly material is needed. The safety edges can be assembled on site, allowing for tailor made solutions according to the local conditions. As a terminating resistor the end plugs are equipped with an 8k2 ohm resistor, which can be monitored by many of the commercially available gate and door controls.
Delivery includes:
- 30m contact profile SENTIR Edge 30.70 TT, width 30mm, height 70mm
On request, we also deliver pre-assembled safety edges according to your desired length. Please send us your requirements and we will make an individual offer.
| Cable Length: | 2.5 m |
|---|---|
| Material: | TPE |
| Max. Operating Temperature: | +50 °C |
| Min. Operating Temperature: | -10 °C |
| Profile Foot: | C-Foot |
| Protection Class: | IP 65 |
| Sealing Lip: | without lid |
Login
Alternative article
Profile for sensing edge SENTIR Edge 35.85 CT by ASO Safety, width 35mm, height 85mm, roll of 30m Description: The Plug’N’Sense System allows easy assembly of the SENTIR Edge 35.85 CT contact edges by ASO Safety. No additional adhesive or other assembly material is needed. The safety edges can be assembled on site, allowing for tailor made solutions according to the local conditions. As a terminating resistor the end plugs are equipped with an 8k2 ohm resistor, which can be monitored by many of the commercially available gate and door controls. Delivery includes: 30m contact profile SENTIR Edge 35.85 CT, width 35mm, height 85mm On request, we also deliver pre-assembled safety edges according to your desired length. Please send us your requirements and we will make an individual offer.
Profile for sensing edge SENTIR Edge 35.55 CT by ASO Safety, width 35mm, height 55mm, roll of 30m Description: The Plug’N’Sense System allows easy assembly of the SENTIR Edge 35.55 CT contact edges by ASO Safety. No additional adhesive or other assembly material is needed. The safety edges can be assembled on site, allowing for tailor made solutions according to the local conditions. As a terminating resistor the end plugs are equipped with an 8k2 ohm resistor, which can be monitored by many of the commercially available gate and door controls. Delivery includes: 30m contact profile SENTIR Edge 35.55 CT, width 35mm, height 55mm On request, we also deliver pre-assembled safety edges according to your desired length. Please send us your requirements and we will make an individual offer.
Accessories
Inductive signal transmission unit, incl. Control unit in housing for rail mounting, moving and staionary coil cores, 20m steel cable and cable tensioner unitDescription:The INDUS compact rail 71-242 Set S by ASO Safety is an inductive signal transmission system for resistive sensing edges with 8,2 kOhm resistance. Its main application is to transmit the signal from the main, moving sensing edge on gates to the stationary gate control unit. The system works with inductive technology and thereby does not need batteries for power supply. Properties:Inductive signal transmission works without batteriesSupply voltage 24 V AC/DCSafety category 3/ PL „e“ acc. to EN ISO 13849 Included in the box:Control unit INDUS rail 71-242 in housing for surface mountingMoving coil core SPK 54 SStationary coil core SP 55, incl. Installation bracket20m steel cable, with 2 additional conductorsCable tensioning unit
Inductive signal transmission unit, incl. Control unit in housing for surface mounting, moving and staionary coil cores, 20m steel cable and cable tensioner unitDescription:The INDUS compact classic 74-312 Set S by ASO Safety is an inductive signal transmission system for resistive sensing edges with 8,2 kOhm resistance. Its main application is to transmit the signal from the main, moving sensing edge on gates to the stationary gate control unit. The system works with inductive technology and thereby does not need batteries for power supply. Properties:Inductive signal transmission works without batteriesSupply voltage 24 V AC/DC or 230 V ACSafety category 3/ PL „e“ acc. to EN ISO 13849 Included in the box:Control unit INDUS classic 74-312 in housing for surface mountingMoving coil core SPK 54 SStationary coil core SP 55, incl. Installation bracket20m steel cable, with 2 additional conductorsCable tensioning unit
Radio-transmitter for wireless sensing edge system, for wireless transmission of optical, resistive or mechanical sensing edges, 868 MHz radio frequency, max. range 50m, connect and monitor up to 2 sensing edges per trasmitter, approx. 2 year battery lifetime, powered by 2 x Battery type 3,6V ER14500 Li-SOCl, does not need an activation signal, sensing edges are always active, operating temperature -20 ... +55°CDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Radio-receiver for wireless sensing edge system, for wireless transmission of optical, resistive or mechanical sensing edges, 868 MHz radio frequency, max. range 50m, can be connected to up to 6 transmitters (3 on relay 1, 3 on relay 2), operating temperature -20 ... +55°C
Control unit for 8k2-Safety Edges, housing for rail mounting, 24 AC/DC, safety level cat. 3/ PL "e"Description:The control unit ELMON rail 32-242 by ASO Safety is used to monitor the status of 8k2-sensing edge. The unit can monitor up to 2 sensors with 8k2 end resistor and has two separate output relays to indicate sensor status. Properties:11 pol. DIN plug-in socket housing with plug-in socket for 35mm railSupply voltage 24 V AC/DC, +/- 10%Reaction time < 12 msInput: 2 sensor signals, 8,2 kOhmOutput: 2 forcibly guided, redundant relaysSafety category 3/ PL „e“ acc. to EN ISO 13849a-1:2008Dimensions: 38 x 82 x 100 mm (BxHxT)
Control unit for 8k2-Safety Edges, housing for surface mounting, 230 V, 24 AC/DC, safety level cat. 3/ PL "e"Description:The control unit ELMON classic 32-312 by ASO Safety is used to monitor the status of 8k2-sensing edge. The unit can monitor up to 2 sensors with 8k2 end resistor and has two separate output relays to indicate sensor status. Properties:Housing for surface mountingSupply voltage 230V, 24 V AC/DC, +/- 10%Reaction time < 12 msInput: 2 sensor signals, 8,2 kOhmOutput: 2 forcibly guided, redundant relaysHousing with clear lidSafety category 3/ PL „e“ acc. to EN ISO 13849-1:2008Dimensions: 120 x 102 x 55 mm (WxHxD)
Aluminium C-Profile, rail of 0,75m length
Plug with 2,5m cable, lock cap, fixation clips and end capDescription:The end cap set KS 4 L2.5 30.70 by ASO Safety is used to assemble SENTIR SE 30.70 type sensing edges. The set comes assembled with 2,5m cable. The set includes:Plug with cableLock capFixation clipsEnd cap
Plug with 0,5m cable, lock cap, fixation clips and end capDescription:The end cap set KS 4 L0.5 30.70 by ASO Safety is used to assemble SENTIR SE 30.70 type sensing edges. The set comes assembled with 0,5m cable. The set includes:Plug with cableLock capFixation clipsEnd cap
Plug with resistor, lock cap, fixation clips and end cap (8,2 kOhm)Description:The end cap set KS 4 W 30.70 by ASO Safety is used to assemble SENTIR SE 30.70 type sensing edges. The integrated 8,2 kOhm resistor can be monitored by either an external control unit or, if compatible, directly by the door control unit. The set includes:Plug with resistorLock capFixation clipsEnd cap