GfA Elektromaten SI 25.10 NHK DES Ø40-Safedrive® 250Nm with Emergency Hand Crank
€865.00
Product information "GfA Elektromaten SI 25.10 NHK DES Ø40-Safedrive® 250Nm with Emergency Hand Crank"
SI-ELEKTROMATEN, Drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 250Nm, output speed 10 rpm, hollow-shaft-Ø 40mm, supply voltage 3~230V/400V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.
Description:
The GfA SI-ELEKTROMATEN "Safedrive" are special drives for industrial doors than require an anti-fallback device.
Features:
- Patented safety brake built into the gear
- All models operate with a manual override on an emergency hand crank
- All models contain a digital limit switch
- Supply voltage 3~230V/400V
| Emergency Operation: | Hand Crank |
|---|---|
| Hollow- / Output-Shaft (Ø): | 40 mm |
| Limit Switch type: | digital Limit Switch DES (GfA Elektromaten) |
| Limit Swtich Range: | 20 |
| Locking Torque: | 635 Nm |
| Max. output speed CLOSE for frequency inverter operation: | 15 min^-1 |
| Max. output speed OPEN for frequency inverter operation: | 18 min^-1 |
| Output Speed: | 10 min^-1 |
| Output Torque: | 250 Nm |
| Power: | 0.55 kW |
| Supply Voltage: | 3~230/400 V |
| max. Movements per Hour: | 20 |
Login
Accessories
Motor cable for GfA Elektromaten drives with digital limit switch DES, length 7m
Motor cable for GfA Elektromaten drives with digital limit switch DES, length 5m
Door control unit TS 971 for GfA Elektromaten drives with digital or mechanical limit switch, automatic or constant pressure to close operation, with integrated radio systemDescription:The door control unit TS 971 by GfA Elektromaten is an automatic control panel for use with GfA Elektromaten drives with digital (DES) or mechanical (NES) limit switch system. The TS 971 control panel comes with an integrated radio receiver for 434 MHz radio products of different manufacturers. In addition, the TS 971 has an integrated receiver, that can be used for the wireless transmission of the door safety edge in combination with the optional WSD module.Properties:Protection class IP54 with CEE plug or IP65 for direct wiringIntegrated push button for UP-STOP-CLOSE commandsIntegrated radio receiver for 434 MHz wireless productsParameter setting via selector switch with digital displayTwo independent, programmable relay contact, e.g. for red-green traffic-lightsOperating modes: hold-to-run or self-hold/ automatic modeAutomatic detection of safety edge type (Optical edge FRABA VITECTOR, resistive edge 8k2 or NC-contact type 1k2 with testing)Automatic timer-to-closeAdjustable intermediate open position, e.g. half open, venting positionAutomatic ground adjustment (only DES) to compensate for rope-stretch or subsequent change in ground heightDue to the pre-assembled, pluggable motor cable, the TS 971 can easily be connected to the drive. A faulty wiring is hereby avoided, thus minimizing installation errors and time. The connection cable can be wired into the control panel housing from either top or bottom. In addition to the motor cable, the TS 971 can work with a multitude of additional inputs, e.g. rope-switches, photo eyes, sensing edges and many more.The TS 971 by GfA Elektromaten comes with the function "radio/ wireless" already integrated, the control panel has an integrated receiver for remotes from different manufacturers using a frequency of 434 MHz. An additional radio receiver is not needed. In addition the wireless sensing edge transmission system WSD is already integrated on the control panel side. The WSD system is a wireless transmission system for sensing edges and allows monitoring and transmission of the most common sensing edge types, as well as pedestrian door and rope tension switches. The use of a coil cord is no longer needed. Of course the TS 971 also allows for connection with a coil cord.The TS 971 has comfort functions and allows installation in more demanding applications. For standard-applications GfA Elektromaten offers the panel type TS970.
Door control unit for GfA Elektromaten drives with digital or mechanical limit switch, automatic or constant pressure to close operation, with 0,7m cable and CEE-plugDescription:The door control unit TS 970 by GfA Elektromaten is an automatic control panel for use with GfA Elektromaten drives with digital (DES) or mechanical (NES) limit switch system.Properties:Protection class IP54Integrated push button for UP-STOP-CLOSE commandsParameter setting via selector switch with digital displayIndependent, programmable relay contact, e.g. for red-green traffic-lightsOperating modes: hold-to-run mode or self-hold/ automatic modeAutomatic detection of safety edge type (Optical edge FRABA VITECTOR, resistive edge 8k2 or NC-contact type 1k2 with testing)Automatic timer-to-closeAdjustable intermediate open position, e.g. half open, venting positionDue to the pre-assembled, pluggable motor cable, the TS 970 can easily be connected to the drive. A faulty wiring is hereby avoided, thus minimizing installation errors and time. The connection cable can be wired into the control panel housing from either top or bottom. In addition tot he motor cable, the TS 970 can work with a multitude of additional inputs, e.g. rope-switches, photo eyes, sensing edges and many more.The TS970 by GfA includes most standard features of a modern door control panel and can therefore be used to operate most industrial doors. For more demanding applications, GfA Elektromaten offers the control panel types TS971 or TS981.
Other customers also bought
Motor cable for GfA Elektromaten drives with digital limit switch DES, length 7m
Motor cable for GfA Elektromaten drives with digital limit switch DES, length 5m
Door control unit TS 971 for GfA Elektromaten drives with digital or mechanical limit switch, automatic or constant pressure to close operation, with integrated radio systemDescription:The door control unit TS 971 by GfA Elektromaten is an automatic control panel for use with GfA Elektromaten drives with digital (DES) or mechanical (NES) limit switch system. The TS 971 control panel comes with an integrated radio receiver for 434 MHz radio products of different manufacturers. In addition, the TS 971 has an integrated receiver, that can be used for the wireless transmission of the door safety edge in combination with the optional WSD module.Properties:Protection class IP54 with CEE plug or IP65 for direct wiringIntegrated push button for UP-STOP-CLOSE commandsIntegrated radio receiver for 434 MHz wireless productsParameter setting via selector switch with digital displayTwo independent, programmable relay contact, e.g. for red-green traffic-lightsOperating modes: hold-to-run or self-hold/ automatic modeAutomatic detection of safety edge type (Optical edge FRABA VITECTOR, resistive edge 8k2 or NC-contact type 1k2 with testing)Automatic timer-to-closeAdjustable intermediate open position, e.g. half open, venting positionAutomatic ground adjustment (only DES) to compensate for rope-stretch or subsequent change in ground heightDue to the pre-assembled, pluggable motor cable, the TS 971 can easily be connected to the drive. A faulty wiring is hereby avoided, thus minimizing installation errors and time. The connection cable can be wired into the control panel housing from either top or bottom. In addition to the motor cable, the TS 971 can work with a multitude of additional inputs, e.g. rope-switches, photo eyes, sensing edges and many more.The TS 971 by GfA Elektromaten comes with the function "radio/ wireless" already integrated, the control panel has an integrated receiver for remotes from different manufacturers using a frequency of 434 MHz. An additional radio receiver is not needed. In addition the wireless sensing edge transmission system WSD is already integrated on the control panel side. The WSD system is a wireless transmission system for sensing edges and allows monitoring and transmission of the most common sensing edge types, as well as pedestrian door and rope tension switches. The use of a coil cord is no longer needed. Of course the TS 971 also allows for connection with a coil cord.The TS 971 has comfort functions and allows installation in more demanding applications. For standard-applications GfA Elektromaten offers the panel type TS970.
Door control unit for GfA Elektromaten drives with digital or mechanical limit switch, automatic or constant pressure to close operation, with 0,7m cable and CEE-plugDescription:The door control unit TS 970 by GfA Elektromaten is an automatic control panel for use with GfA Elektromaten drives with digital (DES) or mechanical (NES) limit switch system.Properties:Protection class IP54Integrated push button for UP-STOP-CLOSE commandsParameter setting via selector switch with digital displayIndependent, programmable relay contact, e.g. for red-green traffic-lightsOperating modes: hold-to-run mode or self-hold/ automatic modeAutomatic detection of safety edge type (Optical edge FRABA VITECTOR, resistive edge 8k2 or NC-contact type 1k2 with testing)Automatic timer-to-closeAdjustable intermediate open position, e.g. half open, venting positionDue to the pre-assembled, pluggable motor cable, the TS 970 can easily be connected to the drive. A faulty wiring is hereby avoided, thus minimizing installation errors and time. The connection cable can be wired into the control panel housing from either top or bottom. In addition tot he motor cable, the TS 970 can work with a multitude of additional inputs, e.g. rope-switches, photo eyes, sensing edges and many more.The TS970 by GfA includes most standard features of a modern door control panel and can therefore be used to operate most industrial doors. For more demanding applications, GfA Elektromaten offers the control panel types TS971 or TS981.