Sectional Door Drive Set MFZ Marantec Ovitor STA 1-13-15 KE CS320 Cable 5m

Motor cable for STA drives, length 5m, also compatible to drive series KD 05, MTZ 05, MDF 05 und MWF 05

CS 320 door control unit, 400V/3-phase version, from MFZ/Marantec/Ovitor The CS 320 industrial door control unit from MFZ / Marantec / Ovitor serves as a convenient automatic control system for industrial doors fitted with door operators from MFZ, Marantec or Ovitor. Specially developed for the operation of roller, sectional or sliding gates, it meets the highest standards and can be operated seamlessly with industrial door operators featuring either a mechanical limit switch (MEC) or digital absolute rotary encoders (AWG). The Marantec CS 320 is one of the most versatile control solutions for industrial door systems and is suitable for both new installations and the modernisation of existing door control systems. Thanks to its support for digital (AWG) and mechanical (MEC) limit switch systems, the CS 320 door control unit can be flexibly integrated into a wide variety of door systems. Key features of the CS 320 control unit Certified to EN 12453:2017: The CS 320 meets the latest safety standards and delivers reliable performance in accordance with the requirements of EN 12453:2017. Add-on modules can be connected via MSBUS: Expand the functionality of the CS 320 by connecting add-on modules via the MSBUS. Drive control in Frequency converter mode: Take advantage of the advanced drive control function in Frequency converter mode on compatible drives for efficient and precise control. Plug-in radio system: The CS 320 offers a plug-in radio system for easy expansion to enable operation with Remote transmitters. LCD display with plain-text display: The clear LCD display provides a clear and easy-to-understand presentation of information, making operation and commissioning easier. Illuminated keypad: The illuminated keypad ensures comfortable operation even in low-light conditions. Connection options for various sensors: The CS 320 is equipped with connection options for various sensors to ensure optimum safety and functionality. Compatibility with the CS 310 accessory range: Seamless integration into existing systems thanks to compatibility with the accessory range of the predecessor control from MFZ/Marantec, the CS 310. Digital or mechanical limit switch systems: The CS 320 works with both the AWG digital limit switch and mechanical limit switches/mechanical limit switches. Variable input voltage: The control unit can be operated on either single-phase 230 V AC or three-phase 400 V AC. The version offered here is pre-wired for operation at 400 V/3-phase and is supplied with a corresponding CEE plug. The CS 320 door control unit is designed for drives up to 2.2 kW and thus offers sufficient power reserves for numerous industrial applications. CS 320 available in various housings Thanks to its flexible control design, the MFZ Marantec Ovitor CS 320 door control unit is available in various housing variants to blend seamlessly into the respective operating environment. The standard housing meets the requirements of most installations; for specialised solutions, the control is also available in a larger combination housing. Thanks to the additional installation space and the option of a DIN-rail mount, this variant is ideal when additional modules and specialised accessories are to be fitted. This allows the Marantec CS 320 to be optimally adapted to the requirements of industrial, commercial and logistics facilities.   Compatible with various gate operators The MFZ Marantec Ovitor CS 320 door control unit is the perfect choice for anyone requiring a reliable control system for their gate systems. Thanks to its wide range of functions and the ease with which it can be expanded using additional and radio modules, the control unit is suitable for many gate installations. As the control unit is suitable for both digital and mechanical limit switch systems, it is also frequently used in the modernisation of existing systems. In combination with a drive system from MFZ Marantec Ovitor, this control unit is an excellent choice for automating a wide variety of door types, whether sectional, roller or sliding gates. Frequently asked questions about the Marantec CS 320 Can the Marantec CS 320 be used as a replacement for a CS 310? Yes, the Marantec CS 320 is the manufacturer’s recommended successor to the CS 310 door control unit and is frequently used when modernising existing gate systems. As it is compatible with the CS 310’s accessories, it can be used as a replacement solution in numerous applications. Is the CS 320 door control unit compatible with mechanical and digital limit switches? Yes. The CS 320 supports both mechanical limit switches (MEC) and digital absolute rotary encoders (types MFZ/Marantec AWG). This makes the control unit suitable for a wide variety of gate operators and modernisation projects. Is the CS 320 door control unit compatible with all digital limit switches? No. Some manufacturers, such as GfA Elektromaten, Hormann, etc., use digital limit switches with proprietary communication interfaces. These digital limit switches are generally not compatible with the CS 320. The AWG-type digital limit switches from MFZ/Marantec are, of course, compatible with the control unit. For which types of doors is the Marantec CS 320 suitable? The control unit can be used on rolling doors, sectional doors and sliding gates. When used in conjunction with compatible MFZ, Marantec or Ovitor drives, it provides reliable control for industrial door systems. What supply voltage does the CS 320 require? The control unit can be operated at both 230 V and 400 V. The version offered here is designed for 400 V / 3-phase operation and is supplied with a 5-pin CEE plug. However, rewiring to 230 V can be carried out on site by an electrician. Which safety devices can be connected to the CS 320 door control unit? The CS 320 supports, amongst other things, edge sensors, photo eyes, light curtains, pass-door switches, slack-rope switches and radar presence detectors. This enables the requirements of modern industrial gates to be reliably met. Can the Marantec CS 320 be expanded? Yes. Various expansion modules (see accessories) can be connected via the MS-BUS. In addition, a slot is available for a radio module, enabling operation with Marantec’s extensive range of radio control systems.

Industrial Door Drive for counter sectional doors, output torque 130 Nm, output speed 15 rpm, hollow shaft diameter 25,4mm, digital limit switch, with emergency hand chain for manual operation, with digital limit switch / absolute rotary encoder AWG, limit switch range 20 rotations max.Description:The drives of the STA/STAW series are ideally designed for counter-balanced sectional doors. This is guaranteed by a special gear with a motor developed to ensure maximum strength in the smallest space. Therefore, the drive is extremely compact, and its casing is very slim.Features:Aluminium die-cast casingRolling worm shaftDual worm shaft bearingThermal protection built into the motor windings230 / 400V / 50 Hz / 3~, custom solutions on requestPlug-in connectors

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PUR-cable, cable length 10,5m/3,0m, without plugsDescription:The FRABA VITECTOR OSE-S1100 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. The sensors are equipped with a top quality PUR Cable (length: transmitter - 10.5 m and receiver - 3.0m). For an electrical connection, the sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Coil cord for doors, EstTPU/PP, black, cable configuration: fine-stranded 5x0,25mm²,  Lif9Y11Y, dimensions: left end = 300mm, coil length = 900mm, right end = 2000mm, max. extension length 3,5m   Description: The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf. Properties: Due to the 800mm-long spiral block, the coil cable can be extended to a length of up to 3.5m. The 5-core cable installation and a 0.25mm² conductor cross-section means the helical cable has enough strands for e.g. the safety edge and slack-rope switches Sheath and core insulation made of high-grade materials Can be installed universally on doors from various manufacturers

Coil cord for doors, black, cable configuration: fine-stranded 4x0,25mm², Lif9Y11Y, PP/ TPU Ether, dimensions: left end = 350mm, coil length = 900mm, right end = 2000mm, max. extension length 3,5mDescription:The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf.Properties:Due to the 900mm-long spiral block, the coil cable can be extended to a length of up to 3.5mThe 4-core cable installation and a 0.25mm² conductor cross-section means the coil cord has enough strands for e.g. the safety edge and slack-rope switches.Can be installed universally on doors from various manufacturers

Coil cord for doors, PUR/ PUR, black, cable configuration: fine-stranded 3x0,25mm², Li11Y11Y, dimensions: left end = 90mm, coil length = 620mm, right end = 500mm, max. extension length 2,5mDescription:The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf.Properties:Due to the 620mm-long spiral block, the coil cable can be extended to a length of up to 2.5m.The 3-core cable installation and a 0.25mm² conductor cross-section enables the signal of the optical sensing edge to be transmitted to the door control unit.Sheath and core insulation made of high-grade Polyurethane (PUR)Can be installed universally on doors from various manufacturers

Electrical box with status LED, 90 x 48,5 x 40mm, with 1x M16 cable gland, 1x blind plug and 1x M16 cable gland with bend protectionDescription:The Fraba Vitector small junction box is distinguished by its compact design. The connection circuit board ensures the cables can be easily connected to the door.Further characteristics:90 x 48,5 x 40mm1 x M16 open in the ground1 x pre-shaped for the ground1 x M16 open in the lidIncludes 1 x M16 cable gland, 1 blind plug, and 1 M16 with bend protection

Electrical box with status LED, 40 x 136 x 56 mm, incl. 3x M16 cable glands, 1x M16 cable gland with bend protection and 4x M16 lock nutDescription:The Fraba Vitector large junction box is useful wherever lots of space is needed for cabling from sensors, photo-eye switches, pass-door switches, slack-rope switches, etc. The connection circuit board ensures the cables can be easily connected to the door.Further characteristics:Dimensions: 40 x 136 x 56 mmTransparent coverPre-punched cable entries 5xM16 in the housing, 1xM16 in the lidIncludes 3xM16 cable glands, 1x bend protector and 4 x locknuts

electrical box, 40 x 136 x 56 mm, incl. 3x M16 cable glands, 1x M16 cable gland with bend protection and 4x M16 lock nutDescription:The Fraba Vitector large junction box is useful wherever lots of space is needed for cabling from sensors, photo-eye switches, pass-door switches, slack-rope switches, etc.Further characteristics:Dimensions: 40 x 136 x 56 mmGrey coverPre-punched cable entries 5xM16 in the housing, 1xM16 in the lidIncludes 3xM16 cable glands, 1x bend protector and 4 x locknuts

Electrical box, 90 x 48,5 x 40mm, with 1x M16 cable gland, 1x blind plug and 1x M16 cable gland with bend protectionDescription:The Fraba Vitector small junction box is distinguished by its compact design.Further characteristics:90 x 48,5 x 40mm1 x M16 open in the ground1 x pre-shaped for the ground1 x M16 open in the lidIncludes 1 x M16 cable gland, 1 blind plug, and 1 M16 with bend protection and terminal strip

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, with Diagnose-LED, PVC-cable, cable length 6,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6701 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 6.5 m and receiver - 0.5 m). Through an LED at the back of the transmitter, the operating status of the sensing edge is always clearly visible. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 6,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6501 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 6.5 m and receiver - 0.5m). The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, with Diagnose-LED, PVC-cable, cable length 0,5m/0,5m, with Molex-plugsDescription:The FRABA VITECTOR OSE-S 6800 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 0.5 m and receiver - 0.5 m) and pre-assembled GfA plugs. Through an LED at the back of the transmitter, the operating status of the sensing edge is always clearly visible. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 0,5m/0,5m, with Molex-plugsDescription:The FRABA VITECTOR OSE-S 6600 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 0.5 m and receiver - 0.5 m) and pre-assembled GfA plugs. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, with Diagnose-LED, PVC-cable, cable length 10,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6702 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 10.5 m and receiver - 0.5 m). Through an LED at the back of the transmitter, the operating status of the sensing edge is always clearly visible. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 10,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6502 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 10.5 m and receiver - 0.5m). The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Programming PCB with LCD display for MFZ Ovitor door control units