ASO Safety Edge Set Sentir Edge 35.85 CT 2,0m
€184.00
Product information "ASO Safety Edge Set Sentir Edge 35.85 CT 2,0m"
Sensing Egde Set Type ASO Safety SENTIR Edge 35.85 CT, Set includes rubber profile and all accessories needed to build a safety edge with a length of 2,0m as end or serial edge, cable length 2,5m, includes aluminium c-profile, assembly without the use of glue or additional assembly materials
Description:
The Plug’N’Sense System allows easy assembly of the SENTIR Edge 35.85 CT contact edges by ASO Safety. No additional adhesive or other assembly material is needed. The safety edges can be assembled on site, allowing for tailor made solutions according to the local conditions. The safety edge sets contain all the necessary materials to produce end and serial edges. As a terminating resistor the end plugs are equipped with an 8k2 ohm resistor, which can be monitored by many of the commercially available gate and door controls.
The safety edge set includes:
- 2,0m contact profile SENTIR Edge 35.85 CT, width 35mm, height 85mm
- 2,0m aluminium profile AL 35-14, width 35mm, height 14mm
- 2 x lock cap
- 1 x resistor plug 8.2 kOhm
- 2 x connector with cable 2,5m
- 2 x end cap 30.70
- 4 x fixation clips
On request, we also deliver pre-assembled safety edges according to your desired length. Please send us your requirements and we will make an individual offer.
| Cable Length: | 2.5 m |
|---|---|
| Hight Rubber Profile: | 85 mm |
| Material: | TPE |
| Max. Operating Temperature: | +50 °C |
| Min. Operating Temperature: | -10 °C |
| Profile Foot: | Clip Foot |
| Protection Class: | IP 65 |
| Sealing Lip: | without lid |
| Width Rubber Profile: | 35 mm |
Login
Other customers also bought
Control unit for 8k2-Safety Edges, housing for surface mounting, 230 V, 24 AC/DC, safety level cat. 3/ PL "e"Description:The control unit ELMON classic 32-312 by ASO Safety is used to monitor the status of 8k2-sensing edge. The unit can monitor up to 2 sensors with 8k2 end resistor and has two separate output relays to indicate sensor status. Properties:Housing for surface mountingSupply voltage 230V, 24 V AC/DC, +/- 10%Reaction time < 12 msInput: 2 sensor signals, 8,2 kOhmOutput: 2 forcibly guided, redundant relaysHousing with clear lidSafety category 3/ PL „e“ acc. to EN ISO 13849-1:2008Dimensions: 120 x 102 x 55 mm (WxHxD)
Inductive signal transmission unit, incl. Control unit in housing for surface mounting, moving and staionary coil cores, 20m steel cable and cable tensioner unitDescription:The INDUS compact classic 74-312 Set S by ASO Safety is an inductive signal transmission system for resistive sensing edges with 8,2 kOhm resistance. Its main application is to transmit the signal from the main, moving sensing edge on gates to the stationary gate control unit. The system works with inductive technology and thereby does not need batteries for power supply. Properties:Inductive signal transmission works without batteriesSupply voltage 24 V AC/DC or 230 V ACSafety category 3/ PL „e“ acc. to EN ISO 13849 Included in the box:Control unit INDUS classic 74-312 in housing for surface mountingMoving coil core SPK 54 SStationary coil core SP 55, incl. Installation bracket20m steel cable, with 2 additional conductorsCable tensioning unit
Radio-receiver for wireless sensing edge system, for wireless transmission of optical, resistive or mechanical sensing edges, 868 MHz radio frequency, max. range 50m, can be connected to up to 6 transmitters (3 on relay 1, 3 on relay 2), operating temperature -20 ... +55°C
Radio-transmitter for wireless sensing edge system, for wireless transmission of optical, resistive or mechanical sensing edges, 868 MHz radio frequency, max. range 50m, connect and monitor up to 2 sensing edges per trasmitter, approx. 2 year battery lifetime, powered by 2 x Battery type 3,6V ER14500 Li-SOCl, does not need an activation signal, sensing edges are always active, operating temperature -20 ... +55°C
Accessories
Control unit for 8k2-Safety Edges, housing for surface mounting, 230 V, 24 AC/DC, safety level cat. 3/ PL "e"Description:The control unit ELMON classic 32-312 by ASO Safety is used to monitor the status of 8k2-sensing edge. The unit can monitor up to 2 sensors with 8k2 end resistor and has two separate output relays to indicate sensor status. Properties:Housing for surface mountingSupply voltage 230V, 24 V AC/DC, +/- 10%Reaction time < 12 msInput: 2 sensor signals, 8,2 kOhmOutput: 2 forcibly guided, redundant relaysHousing with clear lidSafety category 3/ PL „e“ acc. to EN ISO 13849-1:2008Dimensions: 120 x 102 x 55 mm (WxHxD)
Control unit for 8k2-Safety Edges, housing for rail mounting, 24 AC/DC, safety level cat. 3/ PL "e"Description:The control unit ELMON rail 32-242 by ASO Safety is used to monitor the status of 8k2-sensing edge. The unit can monitor up to 2 sensors with 8k2 end resistor and has two separate output relays to indicate sensor status. Properties:11 pol. DIN plug-in socket housing with plug-in socket for 35mm railSupply voltage 24 V AC/DC, +/- 10%Reaction time < 12 msInput: 2 sensor signals, 8,2 kOhmOutput: 2 forcibly guided, redundant relaysSafety category 3/ PL „e“ acc. to EN ISO 13849a-1:2008Dimensions: 38 x 82 x 100 mm (BxHxT)
Control unit for monitoring 8k2 resistive sensing edges, in rail-mounted housing, supply voltage: 24 V AC/DC, 1 channelDescription:The ELMON 01-27 control unit by ASO Safety is used to monitor the status of 8k2-sensing edges. The unit can monitor a single sensing edge with 8k2 end resistor and indicates its status via one output relay.Properties:• Polyurethane housing•Supply voltage 24 V AC/DC, +/- 10%• Reaction time < 5 ms• Input: 1 sensing edge, 8.2 kOhm• Output: 1 relay contact• Housing: Polyurethane housing for a 35mm DIN-rail• Dimensions: 20 x 64 x 46 mm (W x H x D)
Control unit for monitoring 8k2 resistive sensing edges, in surface-mounted housing, supply voltage: 230 V, 12-24 V AC/DC, 1 channel, safety Cat. 2/ PL "d"Description:The ELMON 31-31 control unit by ASO Safety is used to monitor the status of 8k2-sensing edges. The unit can monitor a single sensing edge with 8k2 end resistor and indicates its status via one output relay. Properties:• Surface-mounted housing• Supply voltage 230 V, 12 - 24 V AC/DC, +/- 10%• Reaction time < 5 ms• Input: 1 sensing edge, 8.2 kOhm• Output: 1 relay contact• Housing: transparent lid housing• Safety category 2/ PL “e“, acc. to EN ISO 13849-1:2008• Dimensions: 120 x 100 x 57 mm (W x H x D)
Control unit for monitoring 8k2 resistive sensing edges, in rail-mounted housing, supply voltage: 230 V, 24 V AC/DC, 2 channels, safety Cat. 2/ PL "d"Description:The ELMON 34-32 control unit by ASO Safety is used to monitor the status of 8k2-sensing edges. The unit can monitor up to two sensing edges with 8k2 end resistor and indicates its status via one output relay. Properties:• Rail-mounted housing• Supply voltage 230 V, 12 - 24 V AC/DC, +/- 10%• Reaction time < 5 ms• Input: 2 sensing edges, 8.2 kOhm• Output: 1 relay contact• Housing: rail-mounted housing for a 35mm DIN-rail• Safety category 2/ PL “e“, acc. to EN ISO 13849-1:2008• Dimensions: 22.5 x 114 x 99 mm (W x H x D)
Control unit for monitoring 8k2 resistive sensing edges, in rail-mounted housing, supply voltage: 230 V, 24 V AC/DC, 2 channels, safety level Cat. 2/ PL "d"Description:The ELMON 35-32 control unit by ASO Safety is used to monitor the status of 8k2-sensing edges. The unit can monitor a single sensing edge with 8k2 end resistor and indicates its status via one output relay. Properties:• Rail-mounted housing• Supply voltage 230 V, 24 V AC/DC, +/- 10%• Reaction time < 5 ms• Input: 2 sensing edges, 8.2 kOhm• Output: 2 forcibly guided, relay contacts• Housing: rail-mounted housing for a 35mm DIN-rail• Safety category 3/ PL “e“, acc. to EN ISO 13849-1:2008• Dimensions: 22,5 x 114 x 99 mm (W x H x D)
Control unit for monitoring 8k2 resistive sensing edges, in rail-mounted housing, supply voltage: 24 V DC, 2 channels, safety level Cat. 3/ PL "e"Description:The ELMON 39-726 control unit by ASO Safety is used to monitor the status of 8k2-sensing edges. The unit can monitor a single sensing edge with 8k2 end resistor and indicates its status via one output relay. Properties:• Rail-mounted housing• Supply voltage 24 V DC, +/- 10%• Reaction time < 12 ms• Input: 2 sensing edges, 8.2 kOhm• Output: 2 forcibly guided, relay contacts• Housing: rail-mounted housing for a 35mm DIN-rail• Safety category 3/ PL “e“, acc. to EN ISO 13849-1:2008• Dimensions: 22,5 x 114 x 99 mm (W x H x D)
Control unit for monitoring 8k2 resistive sensing edges, in surface-mounted housing, supply voltage: 230 V, 24 V AC/DC, 1 channel, safety level Cat. 3/ PL "e"Description:The ELMON 41-312 control unit by ASO Safety is used to monitor the status of 8k2-sensing edges. The unit can monitor a single sensing edge with 8k2 end resistor and indicates its status via one output relay. Properties:• Rail-mounted housing• Supply voltage 230 V, 24 V AC/DC, +/- 10%• Reaction time < 12 ms• Input: 2 sensing edges, 8.2 kOhm• Output: 2 forcibly guided, relay contacts• Housing: rail-mounted housing for a 35mm DIN-rail• Safety category 3/ PL “e“, acc. to EN ISO 13849-1:2008• Dimensions: 120 x 102 x 55 mm (W x H x D)
Control unit for monitoring 8k2 resistive sensing edges, in rail-mounted housing, supply voltage: 230 V, 24 V AC/DC, 1 channel, safety level Cat. 3/ PL "e"Description:The ELMON 41-322 control unit by ASO Safety is used to monitor the status of 8k2-sensing edges. The unit can monitor a single sensing edge with 8k2 end resistor and indicates its status via one output relay. Properties:• Rail-mounted housing- Supply voltage 230V, 24 V AC/DC, +/- 10%- Reaction time < 12 ms- Input: 1 sensing edge, 8.2 kOhm- Output: 1 forcibly guided, relay contact- Housing: rail-mounted housing for a 35mm DIN-rail- Safety category 3/ PL “e“, acc. to EN ISO 13849-1:2008- Dimensions: 22.5 x 114 x 99 mm (W x H x D)
Control unit for monitoring 8k2 resistive sensing edges, in rail-mounted housing, supply voltage: 85-205 V, 24 V AC/DC, 2 channels, safety level Cat. 3/ PL "e"Description:The ELMON 41-622 control unit by ASO Safety is used to monitor the status of 8k2-sensing edges. The unit can monitor a single sensing edge with 8k2 end resistor and indicates its status via one output relay. Properties:• Rail-mounted housing• Supply voltage 85...205V, 24 V AC/DC, +/- 10%• Reaction time < 12 ms• Input: 2 sensing edges, 8.2 kOhm• Output: 2 forcibly guided, relay contacts• Housing: rail-mounted housing for a 35mm DIN-rail• Safety category 3/ PL “e“, acc. to EN ISO 13849-1:2008• Dimensions: 45 x 114 x 99 mm (W x H x D)
Control unit for monitoring 8k2 resistive sensing edges, in rail-mounted housing, supply voltage: 120 V, 24 V AC/DC, 1 channel, safety level Cat. 3/ PL "e"Description:The ELMON 41-822 control unit by ASO Safety is used to monitor the status of 8k2-sensing edges. The unit can monitor a single sensing edge with 8k2 end resistor and indicates its status via one output relay. Properties:• Rail-mounted housing• Supply voltage 120 V, 24 V AC/DC, +/- 10%• Reaction time < 12 ms• Input: 1 sensing edge, 8.2 kOhm• Output: 1 forcibly guided, relay contact• Housing: rail-mounted housing for a 35mm DIN-rail• Safety category 3/ PL “e“, acc. to EN ISO 13849-1:2008• Dimensions: 22.5 x 114 x 99 mm (W x H x D)
Inductive signal transmission unit, incl. Control unit in housing for surface mounting, moving and staionary coil cores, 20m steel cable and cable tensioner unitDescription:The INDUS compact classic 74-312 Set S by ASO Safety is an inductive signal transmission system for resistive sensing edges with 8,2 kOhm resistance. Its main application is to transmit the signal from the main, moving sensing edge on gates to the stationary gate control unit. The system works with inductive technology and thereby does not need batteries for power supply. Properties:Inductive signal transmission works without batteriesSupply voltage 24 V AC/DC or 230 V ACSafety category 3/ PL „e“ acc. to EN ISO 13849 Included in the box:Control unit INDUS classic 74-312 in housing for surface mountingMoving coil core SPK 54 SStationary coil core SP 55, incl. Installation bracket20m steel cable, with 2 additional conductorsCable tensioning unit
Inductive signal transmission unit, incl. Control unit in housing for rail mounting, moving and staionary coil cores, 20m steel cable and cable tensioner unitDescription:The INDUS compact rail 71-242 Set S by ASO Safety is an inductive signal transmission system for resistive sensing edges with 8,2 kOhm resistance. Its main application is to transmit the signal from the main, moving sensing edge on gates to the stationary gate control unit. The system works with inductive technology and thereby does not need batteries for power supply. Properties:Inductive signal transmission works without batteriesSupply voltage 24 V AC/DCSafety category 3/ PL „e“ acc. to EN ISO 13849 Included in the box:Control unit INDUS rail 71-242 in housing for surface mountingMoving coil core SPK 54 SStationary coil core SP 55, incl. Installation bracket20m steel cable, with 2 additional conductorsCable tensioning unit
Alternative article
Sensing Egde Set Type ASO Safety SENTIR Edge 30.70 TT, Set includes rubber profile and all accessories needed to build a safety edge with a length of 1,5m as end or serial edge, cable length 2,5m, includes aluminium c-profile, assembly without the use of glue or additional assembly materials Description: The Plug’N’Sense System allows easy assembly of the SENTIR Edge 30.70 TT contact edges by ASO Safety. No additional adhesive or other assembly material is needed. The safety edges can be assembled on site, allowing for tailor made solutions according to the local conditions. The safety edge sets contain all the necessary materials to produce end and serial edges. As a terminating resistor the end plugs are equipped with an 8k2 ohm resistor, which can be monitored by many of the commercially available gate and door controls. The safety edge set includes: 1,5m contact profile SENTIR Edge 30.70 TT, width 30mm, height 70mm 2 x 0,75 m aluminium profile AL 30-14, width 30mm, height 14mm 2 x lock cap 1 x resistor plug 8.2 kOhm 2 x connector with cable 2,5m 2 x end cap 30.70 4 x fixation clips On request, we also deliver pre-assembled safety edges according to your desired length. Please send us your requirements and we will make an individual offer.
Sensing Egde Set Type ASO Safety SENTIR Edge 35.55 CT, Set includes rubber profile and all accessories needed to build a safety edge with a length of 1,5m as end or serial edge, cable length 2,5m, includes aluminium c-profile, assembly without the use of glue or additional assembly materials Description: The Plug’N’Sense System allows easy assembly of the SENTIR Edge 35.55 CT contact edges by ASO Safety. No additional adhesive or other assembly material is needed. The safety edges can be assembled on site, allowing for tailor made solutions according to the local conditions. The safety edge sets contain all the necessary materials to produce end and serial edges. As a terminating resistor the end plugs are equipped with an 8k2 ohm resistor, which can be monitored by many of the commercially available gate and door controls. The safety edge set includes: 1,5m contact profile SENTIR Edge 35.55 CT, width 35mm, height 55mm 2 x 0,75m aluminium profile AL 35-14, width 35mm, height 14mm 2 x lock cap 1 x resistor plug 8.2 kOhm 2 x connector with cable 2,5m 2 x end cap 35.55 4 x fixation clips On request, we also deliver pre-assembled safety edges according to your desired length. Please send us your requirements and we will make an individual offer.
Sensing Egde Set Type ASO Safety SENTIR Edge 35.85 CT, Set includes rubber profile and all accessories needed to build a safety edge with a length of 1,5m as end or serial edge, cable length 2,5m, includes aluminium c-profile, assembly without the use of glue or additional assembly materialsDescription:The Plug’N’Sense System allows easy assembly of the SENTIR Edge 35.85 CT contact edges by ASO Safety. No additional adhesive or other assembly material is needed. The safety edges can be assembled on site, allowing for tailor made solutions according to the local conditions. The safety edge sets contain all the necessary materials to produce end and serial edges. As a terminating resistor the end plugs are equipped with an 8k2 ohm resistor, which can be monitored by many of the commercially available gate and door controls.The safety edge set includes:1,5m contact profile SENTIR Edge 35.85 CT, width 35mm, height 85mm1,5m aluminium profile AL 35-14, width 35mm, height 14mm2 x lock cap1 x resistor plug 8.2 kOhm2 x connector with cable 2,5m2 x end cap 30.704 x fixation clipsOn request, we also deliver pre-assembled safety edges according to your desired length. Please send us your requirements and we will make an individual offer.