GfA Elektromaten SI63 3,5.350 FI NHK DES Ø30-Safedrive® with Integrated Frequency Inverter 35Nm with Emergency Hand Crank

Motor cable for GfA Elektromaten drives with digital limit switch DES, length 7m

Motor cable for GfA Elektromaten drives with digital limit switch DES, length 5m

Door control unit for GfA Elektromaten drives with digital limit switch, automatic or constant pressure to close operation, RWA function (smoke draining) actuates a compulsory door opening, to be used with external smoke alarm systems, One-way and two-way traffic control with adjustable functions, optional modules for connection to TS981 offer additional functionsDescription:The TS 981 from GfA Elektromaten is a comfort control unit for GfA door drives with a digital limit switch DES. The very wide range of functions of the control unit can be extended to include many special functions through various additional modules. This means that the TS 981 also offers a solution for more complex applications.Properties:- For GfA ELEKTROMATEN with digital limit switch DES - Integrated three-button keypad OPEN-STOP-CLOSE- Settings made via rotary selector switch with digital display- Settings of the end positions and all the functions on the controller level- Automatic sensing edge recognition and evaluation- Programmable partially open position with individual programming possibilities- Pull-in protection evaluation- Various special functions with additional modules

Door control unit for GfA Elektromaten drives with digital or mechanical limit switch, automatic or constant pressure to close operation, with integrated radio system, with 0,7m connection cable and CEE-plugDescription:The door control unit TS 971 by GfA Elektromaten is an automatic control panel for use with GfA Elektromaten drives with digital (DES) or mechanical (NES) limit switch system. The TS 971 control panel comes with an integrated radio receiver for 434 MHz radio products of different manufacturers. In addition the TS 971 has an integrated receiver, that can be used for the wireless transmission of the door safety edge in combination with the optional WSD module.Properties:Protection class IP54 with CEE plug or IP65 for direct wiringIntegrated push button for UP-STOP-CLOSE commandsIntegrated radio receiver for 434 MHz wireless productsParameter setting via selector switch with digital displayTwo independent, programmable relay contacts, e.g. for red-green traffic-lightsOperating modes: hold-to-run mode or self-hold/ automatic modeAutomatic detection of safety edge type (Optical edge FRABA VITECTOR, resistive edge 8k2 or NC-contact type 1k2 with testing)Automatic timer-to-closeAdjustable intermediate open position, e.g. half open, venting positionAutomatic ground adjustment (only DES) to compensate for rope-stretch or subsequent change in ground heightDue to the pre-assembled, pluggable motor cable, the TS 971 can easily be connected to the drive. Faulty wiring is hereby avoided, thus minimizing installation errors and time. The connection cable can be wired into the control panel housing from either top or bottom. In addition to the motor cable, the TS 971 can work with a multitude of additional inputs, e.g. rope-switches, photo eyes, sensing edges and many more.The TS 971 by GfA Elektromaten comes with the function "radio/ wireless" already integrated, the control panel has an integrated receiver for remotes of different manufacturers using a frequency of 434 MHz. An additional radio receiver is not needed. In addition the wireless sensing edge transmission system WSD is already integrated on the control panel side. The WSD system is a wireless transmission system for sensing edges and allows monitoring and transmission of the most common sensing edge types, as well as pedestrian door and rope tension switches. The use of a coil cord is no longer needed. Of course the TS971 also allows for connection with a coil cord.The TS971 has comfort functions and allows installation in more demanding applications. For standard-applications GfA Elektromaten offers the panel type TS970.

Door control unit for GfA Elektromaten drives with digital or mechanical limit switch, automatic or constant pressure to close operation, with 0,7m cable and CEE-plugDescription:The door control unit TS 970 by GfA Elektromaten is an automatic control panel for use with GfA Elektromaten drives with digital (DES) or mechanical (NES) limit switch system.Properties:Protection class IP54Integrated push button for UP-STOP-CLOSE commandsParameter setting via selector switch with digital displayIndependent, programmable relay contact, e.g. for red-green traffic-lightsOperating modes: hold-to-run mode or self-hold/ automatic modeAutomatic detection of safety edge type (Optical edge FRABA VITECTOR, resistive edge 8k2 or NC-contact type 1k2 with testing)Automatic timer-to-closeAdjustable intermediate open position, e.g. half open, venting positionDue tot he pre-assembled, pluggable motor cable, the TS 970 can easily be connected to the drive. A faulty wiring is hereby avoided, thus minimizing installation errors and time. The connection cable can be wired into the control panel housing from either top or bottom. In addition tot he motor cable, the TS 970 can work with a multitude of additional inputs, e.g. rope-switches, photo eyes, sensing edges and many more.The TS970 by GfA includes most standard-features of a modern door control panel and can therefore be used to operate most industrial doors. For more demanding applications, GfA Elektromaten offers the control panel types TS971 or TS981.

SI-ELEKTROMATEN, with integrated frequency inverter, drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 35Nm, output speed up to 350 rpm, hollow-shaft-Ø 40mm, supply voltage 1N~230V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.

SI-ELEKTROMATEN, with integrated frequency inverter, drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 35Nm, output speed up to 350 rpm, hollow-shaft-Ø 31,75mm, supply voltage 1N~230V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.

SI-ELEKTROMATEN, with integrated frequency inverter, drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 35Nm, output speed up to 350 rpm, hollow-shaft-Ø 25,4mm, supply voltage 1N~230V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.

SI-ELEKTROMATEN, with integrated frequency inverter, drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 35Nm, output speed up to 350 rpm, hollow-shaft-Ø 25mm, supply voltage 1N~230V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.