FRABA VITECTOR RAY-S 1101 Photo Eye for Pull-In Protection with Hardware
€139.00
delivery time: 3-5 working days
Product information "FRABA VITECTOR RAY-S 1101 Photo Eye for Pull-In Protection with Hardware"
Pull-in protection for doors, set includes: 1x IR transmitter, 1x receiver with 10,5m cable each, mounting brackets and screws
Description:
The safety light barrier RAYTECTOR from FRABA Vitector can be used in rolling grill doors as pull-in protection. The light barrier is constructed in such a way that it will reliably detect when there is interference by outside light, whenever a light beam is broken, or when an electrical component fails (including the connection to the monitoring unit). A two-coloured LED shows the various operating modes clearly on the front part of the receiver. The set, made up of sender and receiver, is delivered with a mounting bracket for easy alignment and simple installation on rolling grill doors.
Properties:
- Compatible with FRABA OSE interface
- LED indicator to help alignment of transmitter and receiver
- Mounting bracket for easy alignment
- Range 1.5m – 10m
- Protection class: IP68
| Cable Length: | 10.5 / 10.5 m |
|---|---|
| Connection Type: | Cable, w/o plug |
| Material: | ABS |
| Max. Operating Temperature: | +55 °C |
| Min. Operating Temperature: | -20 °C |
| Output: | OSE |
| Protection Class: | IP 54 |
| Range: | 10 m |
| Supply Voltage: | DC 5-28 V |
| max. Current Consumption: | 60 mA |
Login
Accessories
Control unit to monitor up to 4 optical sensing edges OSE, relay output (stop, alarm), reset, suppy voltage 24 V AC/DC, DIN-rail enclosure, width 25mm, rated cat. 3 PL d (EN 13849-1)Description:The FRABA VITECTOR OSE-C 5024 is a control unit for optical sensing edges on machines and doors. The control unit monitors up to 4 (FRABA VITECTOR OSE-type) optical sensing edges and converts the safety signal of the sensors into potential-free NC relay contact. In addition to the safety output, the OSE-C 5024 provides an semiconductor output (PNP open collector) as a signalling output e.g. for a higher level of control.Housing in a DIN-rail mounting enclosureHousing protection class: IP40, Terminal Block IP 20Supply Voltage 24 V AC/DCSafety Category: Cat. 3 PLc according to EN13849-1
Control unit to monitor up to 2 optical sensing edges OSE, relay output (Stop, Alarm), supply voltage 24 V DC, DIN-rail enclosure, width 25mm, rated cat. 1 PL c (EN 13849-1)Description:The FRABA VITECTOR OSE-C 4524 is a control unit for optical sensing edges on machines and doors. The control unit monitors up to two (FRABA VITECTOR OSE -type) optical sensing edges and converts the safety signal of the sensors into potential-free NC relay contact. In addition to the safety output, the OSE-C 4524 also provides another signalling contact (Relay, changeover contact) e.g. for a higher level of control.Housing in a DIN-rail mounting enclosureHousing protection class: IP40, Terminal Block IP 20Supply Voltage 24 V DCSafety Category: Cat. 1 PLc according to EN13849-1
Control unit to monitor 1 optical sensing edge OSE, relay output (stop), reset, power supply 24 V DC, DIN-rail enclosure, width 25mm, rated Cat. 4 PL e (EN 13849-1)Description:The FRABA VITECTOR OSE-C 4024 is a control unit for optical sensing edges on machines and doors. The control unit monitors an optical sensing edge (FRABA VITECTOR OSE -type) and converts the safety signal of the sensors into potential-free NC relay contact. In addition to the safety output, the OSE-C 4024 also provides a semiconductor output (PNP open collector) as a signalling output e.g. for a higher level of control.Housing in a DIN-rail mounting enclosureHousing protection class: IP40, Terminal Block IP 20Supply Voltage 24 V DCSafety Category: Cat. 4 PLc according to EN13849-1UL certified
Control unit for optical sensing edges OSE or 8k2 resistive edges, relay output (stop, reverse and cable tension switch), monitors up to 2 sensing edges, IP65 enclosure, supply voltage 24 V AC/DC, rated Cat. 3 PL d (EN 13849-1)Description:The FRABA VITECTOR OSE-C 2324 is a control unit for optical sensing edges on doors. The control unit can monitor and evaluate both optical sensing edges (type FRABA VITECTOR OSE) and resistant sensing edges with a terminal resistance of 8k2 Ohm. Besides this, a stop circuit (e.g. slack-rope switch and pass-door switch) can be monitored with this device.Several relay outputs (stop reverse and slack-rope switch, pass-door switch)Monitors up to 2 OSE or 8k2 safety edgesHousing unit protection class: IP65Supply voltage: 24 V AC/DCSafety category: Cat.3 PL according to EN13849-1
Control unit for optical sensing edges OSE or 8k2 resistive edges, relay output (stop, reverse and cable tension switch), monitors up to 2 sensing edges, IP65 enclosure, supply voltage 230 V DC, rated Cat. 3 PL d (EN 13849-1)Description:The FRABA VITECTOR OSE-C 2323 is a control unit for optical sensing edges on doors. The control unit can monitor and evaluate both optical sensing edges (type FRABA VITECTOR OSE) and resistant sensing edges with a terminal resistance of 8k2 Ohm. Besides this, a stop circuit (e.g. slack-rope switch and pass-door switch) can be monitored with this device.Several relay outputs (stop reverse and slack-rope switch, pass-door switch)Monitors up to 2 OSE or 8k2 safety edgesHousing unit protection class: IP65Supply voltage: 230 V ACSafety category: Cat.3 PL according to EN13849-1
Control unit for optical sensing edges OSE, relay output (stop and reverse), monitors up to 2 sensing edges, supply voltage 24 V DC, rated Cat. 3 PL c (EN 13849-1)Description:The FRABA VITECTOR OSE-C 2301 is a control unit for optical sensing edges on doors. The control unit can monitor and evaluate up to two optical sensing edges type (FRABA VITECTOR OSE) or two pull-in protection devices (type FRABA VITECTOR RAYTECTOR). Thereby, the security signal of the sensors can be converted via the evaluation of the OSE-C 2300 into a potential-free NC relay contact. As well as the safety output, the OSE-C2301 also delivers a NO relay contact which e.g. can be used to reverse the door when operating the safety edge.Several relay outputs (stop and reverse)Monitors up to 2 OSE sensing edges or pull-in protection devicesHousing unit protection class: IP65Supply voltage: 24V DCSafety category: Cat.3 PL according to EN13849-1
Control unit for optical sensing edges OSE, relay output (stop and reverse), monitors up to 2 sensing edges, supply voltage 230 V AC, rated Cat. 3 PL c (EN 13849-1)Description:The FRABA VITECTOR OSE-C 2300 is a control unit for optical sensing edges on doors. The control unit can monitor and evaluate up to two optical sensing edges type (FRABA VITECTOR OSE) or two pull-in protection devices (type FRABA VITECTOR RAYTECTOR). Thereby, the security signal of the sensors can be converted via the evaluation of the OSE-C 2300 into a potential-free NC relay contact. As well as the safety output, the OSE-C2300 also delivers a NO relay contact which e.g. can be used to reverse the door when operating the safety edge.Several relay outputs (stop and reverse)Monitors up to 2 OSE sensing edges or pull-in protection devicesHousing unit protection class: IP65Supply voltage: 230V ACSafety category: Cat.3 PL according to EN13849-1