Hekatron Power Supply and Actuation Unit NAG 03 with SAB 04

The Arrest System Central Units FSZ Basis is power supply, control unit, hand switch, alarm storage and reset-switch in one unitDescription:The Hekatron FSZ Basis Arrest System Central Unit is a hold-open control unit which fulfils the testing specifications of the DIBt (German Institute for Structural Engineering) as well as the requirements of the DIN EN 14637. It is suitable for application in doors and gates in various fields, from industrial to administration buildings. This system is particularly suited to damp, dusty, warm and cold environments, and can withstand temperatures from -10°C to +50°C. Fault causes can be tracked via the LED flash code on the keypad. The system’s DIP switch can be used to activate alarm storage and line surveillance. Its signal output is a relay with potential-free alternating contact. The power supply unit is equipped to deal with short-circuits and excess temperature shutdown. The FSZ Basis replaces the reliable NG 519 and can also be integrated into existing facilities. Properties:- Power supply, control unit, pushbutton, temporary alarm memory, and reset key in one- Conforms to DIN EN 14637 and DIBt regulations.- Backward compatible to existing arrest systems so can be modernised at low cost.- Optional circuit monitoring in accordance with DIN EN 14637- Saves alarm settings- Separate control unit settings possibilities through two alarm outputs- Cable entry points at the top, bottom, or the back of the unit- Easily accessible connection terminals- Protected against short circuits- Compatible with all supply networks and earlier models- Cable glands (M16 and M20 x 1.5 with locknut), mounting set, end module, and assembly instructions included- Integrated manual release button conforming to standard and reset buttons.

Hekatron ORS 142, Optical smoke and thermal switch, detection of smouldering fires and open fires with smoke development, for wall or ceiling mounting, for control of hold-open control unitsDescription:The optical smoke switch ORS 142 from Hekatron offers a solid solution for fire detection. With its optical operation indicator, Contamination compensation and processor control, it ensures a high level of safety. The ORS 142 is specifically designed for the detection of smoldering and open fires with smoke generation, as well as the control of hold-open control units. Technical features: Optical contamination/condition indication for easy monitoring. Processor control for accurate fire detection. Suitable for smoldering and open fires with smoke generation. Ideal for control of hold-open control unit Replacement indicator according to DIN 14677 Optional integrated circuit monitoring Extended temperature range for down to -30 °C Measuring chamber monitoring Communication port for RSBus Potential-free normally closed contact Thermocouple for tripping at ambient temperature above 70 °C With dust protection cap The sensor replacement indicator automatically indicates the replacement of the detector after 8 years as required by DIN 14677. Choose the Hekatron ORS 142 for reliable fire detection and maximum safety!

The Arrest System Central Units FSZ Basis is power supply, control unit, hand switch, alarm storage and reset-switch in one unitDescription:The Hekatron FSZ Basis Arrest System Central Unit is a hold-open control unit which fulfils the testing specifications of the DIBt (German Institute for Structural Engineering) as well as the requirements of the DIN EN 14637. It is suitable for application in doors and gates in various fields, from industrial to administration buildings. This system is particularly suited to damp, dusty, warm and cold environments, and can withstand temperatures from -10°C to +50°C. Fault causes can be tracked via the LED flash code on the keypad. The system’s DIP switch can be used to activate alarm storage and line surveillance. Its signal output is a relay with potential-free alternating contact. The power supply unit is equipped to deal with short-circuits and excess temperature shutdown. The FSZ Basis replaces the reliable NG 519 and can also be integrated into existing facilities. Properties:- Power supply, control unit, pushbutton, temporary alarm memory, and reset key in one- Conforms to DIN EN 14637 and DIBt regulations.- Backward compatible to existing arrest systems so can be modernised at low cost.- Optional circuit monitoring in accordance with DIN EN 14637- Saves alarm settings- Separate control unit settings possibilities through two alarm outputs- Cable entry points at the top, bottom, or the back of the unit- Easily accessible connection terminals- Protected against short circuits- Compatible with all supply networks and earlier models- Cable glands (M16 and M20 x 1.5 with locknut), mounting set, end module, and assembly instructions included- Integrated manual release button conforming to standard and reset buttons.