Accessories
Accessories of the appropriate quality can be crucial when it comes to the longevity of automatic doors. In industrial environments in particular, the quick availability of the required spare parts is important in order to avoid downtime and the associated costs.
The online shop of doorautomation24 therefore offers a wide range of important accessories for automatic industrial doors such as sectional doors, rolling doors or swing doors as well as garage doors. It also offers accessories and spare parts for many common door drives, controls, sensors and Springs. Most products are in stock and ready for immediate shipment.
Signal light in yellow, can be combined with other colours for traffic light application, with E27 socket, no light bulb includedDescription:The yellow Signal Light, with a lens diameter of 120mm can be used as single signal or, in combination with additional units, as double or triple signal light. The lens is available in red, green, and yellow and the signal lights can be combined with the use of a special connector. The lights come with a built-in E27 bulb fitting, and can be installed using the mounting bracket, also included in the package.Properties:Available in red, green and yellowCan be combined into double or triple signal lightsWith E27 bulb fitting (light bulbs not included)Material ABS HHProtection class IP65Installation bracket powder-coated steel
Adapter for the installation of chain drives to the door shaft, for door shafts with 35,0mm diameter and keyed shaft profile
Bottom section for GfA Elektromaten control units TS959, TS970 and TS971, for installation of the TS board
record Slide Arm PULL GG2, includes lever adapter 20 (D= 40 mm), spigot shaft 10 mm, recess depth +/- 10 mm
Replacement part for marathon 550 SL, toroidal core transformer 230/24V 150VA, standard plug-in
Motor cable for Tormatic NovoShaft drives with digital limit switch, cable length 5m
Shaft adapter for 25.4mm shafts to 40.0mm shaft
With pluggable mains supply cable of length 0.7m
carriage marathon S 800 N / 800 SL complete anthracite cover
Installation in CS310/ 320 standard- and combi-housing lid (delivery without lid), ON/ OFF Switch for power supply voltage
Adapter for the installation of chain drives to the door shaft, for door shafts with hex 32,0 mm shaft
Motor cable set to connect the CS3xx FU/E control unit to the STA or MTZ drives of the 05-series, length 5m
Hormann Art. Nr. 637992, Enclosure cover with foil and display board, for door control unit A 445, production period 01.10.2003 -
Shaft adapter for 25.4mm shafts to 31.75mm keyed shaft
Adapter for the installation of chain drives to the door shaft, for keyed door shafts with 31,75mm diameter
Connection cable for BEA sensors type IXIO-DT3
Chain drive for counter-balanced sectional doors, hollow shaft center distance 483mm, gear ratio 1:1, drive-side with 25,4mm hollow-shaft, door-side variable with optionally available adaptersDescription:Chain drives are used to install drives on sectional doors, when reduced space does not allow for installation directly to the door shaft. In these cases, the drive is connected to the door shaft via a chain drive. The gear ratio of the chain drive is 1:1 meaning that one rotation of the drive results in one rotation of the door shaft. Technical properties:For indirect installation of the door drive on counter-balanced sectional doorsHollow shaft distance 483mmGear ratio 1:1The chain drive comes equipped with a 25,4mm hollow-shaft on the drive-sideFor the door-side, a fitting adapter needs to be used (optionally available)
Bumper for optical sensing edges, 35 x 30 x 18 mm, Screw M8, material: PP
Digital limit switch DES 10 as replacement part for drives by GfA Elektromaten
Metall sleeve for reducing the inner diameter of the hollow shaft from 40mm to 31,75mm
Signal light incl. LED, wall-mount bracket and installation hardware, warning signal before or during the door movement, programmable as constant ON or blinking light, power supply 18 - 30 V DC, protection class IP54, dimensions 70 x 135 x 105mm