Other
Prepared loop, circumference 6m, 10m connection cable, Other dimensions available upon request: loop circumference min. 6m, max. 25m, connection cable length max. 50m
ground sensor 1500mmDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Hormann Art. Nr. 435950, replacement drive SupraMatic H (Series 2); Note: Mounting hardware and radio remote control not included. Includes lighting material; Production period 01.09.2005 -
End cap for Rubber Profile OSE-P 25 33 00
Hormann Art. Nr. 159611, replacement main switch for door control BK 150 FUE
Silicone hose, hardness shore A 55-60° +/- 5°, operating temperature -60 bis +200°C, 2m length
ground sensor 2000mmDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
EM module by ASO Safety for installation in the ASO Safety door control unit DRICO slife 100
Hormann Art. Nr. 157298, replacement Foil keyboard for door control AKE (side)
Hormann Art. Nr. 306815, replacement Foil keyboard for door control AKE (below)
Hormann Art. Nr. 638226, bag of screws for control unit with base and power board; Production period 01.10.2003 -
Hormann Art. Nr. 4980737, replacement Enclosure for door control BK 150 FUE-1 with main switch and emergency stop
Hormann Art. Nr. 637991, Enclosure cover with foil and display board, for door control unit B 440, production period 01.08.2008 - 31.07.2011
Extension board for the BDC-i440 door control by Becker, inputs for monitoring additional safety devices, additional control devices and control of application-specific outputs.
Emergency Hand Chain "light chain" for Becker industrial door drives, for changing from emergency hand crank to chain or as replacement part, for drives from production date 43/2018 upwards, replacement part for Becker sectional door drives A50, AW50, A70, A100 and other typesDescription:The "Light chain" retrofit kit from Becker is used to convert Becker industrial door drives with hand crank to emergency hand chain or as a spare part in case of defective emergency hand chains. The set contains all necessary parts, including 6m chain.The "light chain" retrofit kit is suitable for the following Becker drive types, among others:A35/112A50/25A50/40A50/90A55/90A70/16A70/25A70/40A70/60A80/29A80/40A90/20A90/60A100/5,3A100/10,5A100/25A110/30A130/29A140/20A150/10A150/13A150/15A150/20A150/29A190/20A220/13A280/10A280/12A150-S68A280-S68AW25/25AW50/22AW50/25AW120/11
ground sensor 1000mmDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
replacement rubber profile for ground sensor DGU 3000mmDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Replacement part for drives with brakes, drive size SG115, 20Nm, 102V/130V, Standard configuration for 3~230/400V-50Hz
Replacement part for drives with brakes, 11Nm, 102V/130V
Protective cage for optical smoke-detector ORS 142
Prepared loop, circumference 8m, 5m connection cable, Other dimensions available upon request: loop circumference min. 6m, max. 25m, connection cable length max. 50mDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Extension board to add Inputs/ Outputs on TST FUZ2, TST FUF2 und TST FU3F control units, 6 x relay outputs, 1 x transistor output, serial communication interface
Hormann Art. Nr. 638120, housing frame gear unit with injected seal WA 400, WA 400 M, ITO 400; production period 01.10.2003 -