Door Drives
Door operators are used for the electrical operation of automatic door systems. Depending on the door type, there are different operator systems and requirements for the door operator.
Drives for industrial doors
Industrial door operators are used for the electric opening and closing of special doors used in industrial environments. These industrial doors control access to warehouses, factories, logistics centres and other industrial facilities. Unlike ordinary doors, industrial doors are usually larger, more robust and designed for use in demanding environments. Depending on the specific requirements of the site, these doors can have different designs, including sliding gates, sectional doors, rolling doors or folding doors.
There are different types of door drives to automate the various types of doors, from simple sectional door drives and special sliding door drives to rolling door drives with integrated safety brakes. Drives with variable output speeds and frequency inverter operation are used for door applications with particularly high running speeds, such as high-speed doors.
Garage door openers
Garage door openers are primarily used to enable the automatic operation of garage doors. These operator systems play a crucial role in residential buildings, collective garages and small commercial buildings, where they are used to make access to the garage more convenient and efficient. Essentially, Garage door openers automate the process of opening and closing garage doors, allowing users to, for example, drive their vehicle into the garage without manually opening the door.
Garage door openers are available in a variety of designs, including chain openers, screw openers and belt openers. The choice of operator type depends on various factors, including the size and weight of the garage door as well as personal preferences in terms of noise levels and maintenance requirements.
Modern Garage door openers are often equipped with smart features that allow the status of the garage door to be monitored and control to be taken over via smartphone apps.
GfA Elektromaten SE 6.65 DU SK DES Ø25,4 Drive for Sectional Doors with Direct Inverter 60Nm Emergency Hand Chain
SE-ELEKTROMATEN, Drive for counter balanced sectional doors, output torque 60Nm, variable output speed up to 65 rpm, max. door weight 3000 N, supply voltage 3~400V, hollow shaft diameter 25,4mm, with emergency hand chain for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.
MFZ Marantec Ovitor SDO-35-20-24 E HD AWG Ø35-Slidng door drive 200Nm with CS320 control unit
Drive with quick release mechanism for use on sliding doors, drive output torque 200Nm, drive speed 24 rpm, output shaft Ø 35mm, includes brakes, with digital limit switch / absolute rotary encoder AWG, limit switch ratio 1:1 (38ES), supply voltage 400V/3~, supply frequency 50Hz, includes CS 320 control unit.Description:The sliding gate drives of the SDO series from MFZ Marantec Ovitor are characterized by their compact design, ensuring the best options for installation. The convenient emergency release is integrated as standard and therefore offers the safest solution for the gate. The powerful electric motor with integrated brake was especially developed for sliding gates, optimally adapted to the requirements in this area. With a complete range from 80 to 330Nm, MFZ Marantec Ovitor offers the best solution for any on-site condition.Technical characteristics:• For mains operation with power supply of 230 / 400V / 3~, 230V / 1~• Rotating shaft pluggable on both sides• Foot or flange installation• Emergency operation by means of emergency release (E)• End position settings via electronic absolute rotary encoder AWG• Thermal protection in the motor winding
MFZ Marantec Ovitor SDO-35-20-24 E FU HD AWG 400V/3PH Ø35-Slidng door drive 200Nm with CS320 FU control unit
Drive with frequency converter and quick release mechanism for use on sliding doors, drive output torque 200Nm, drive speed 24 rpm, output shaft Ø 35mm, includes brakes, with digital limit switch / absolute rotary encoder AWG, limit switch ratio 1:2 (76ES), supply voltage 400V/3~, supply frequency 50Hz, includes CS 320 FU control unitDescription:The sliding gate drives of the SDO series from MFZ Marantec Ovitor are characterized by their compact design, ensuring the best options for installation. The convenient emergency release is integrated as standard and therefore offers the safest solution for the gate. The powerful electric motor with integrated brake and the CS320 FU control unit were especially developed for sliding gates, optimally adapted to the requirements in this area. With a complete range from 80 to 330Nm, MFZ Marantec Ovitor offers the best solution for any on-site condition.Technical characteristics:• For mains operation with power supply of 230 / 400V / 3~, 230V / 1~• Rotating shaft pluggable on both sides• Foot or flange installation• Emergency operation by means of emergency release (E)• End position settings via electronic absolute rotary encoder AWG• Thermal protection in the motor winding
GfA Elektromaten SI 40.40 FI NHK DES Ø40-Safedrive® with Integrated Frequency Inverter 400Nm with Emergency Hand Crank
SI-ELEKTROMATEN, with integrated frequency inverter, drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 400Nm, output speed up to 40 rpm, hollow-shaft-Ø 40mm, supply voltage 1N~230V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.
GfA Elektromaten KE 80.24 NHK DES Ø55-Chain Drive for Doors 800Nm with Emergency Hand Crank
KE-ELEKTROMATEN, Drive for chain driven roller shutters or rolling grilles, output torque 800Nm, output speed 24 rpm, supply voltage 3~230V/400V, with emergency hand crank for manual operation, Attention: The sprocket is not included and can be ordered separately, digital limit switch DES, limit switch range E=20 revolutions max.Description:The GfA KE ELEKTROMATEN chain drives are special drives for industrial doors. The door shaft drive is operated by a chain transmission. For applications which require an anti-fallback device a separate safety brake is required.KE ELEKTROMATEN consists of:Electric motorWorm gearPluggable output shafts for installations on left and right sidesEmergency manual overrideIntegrated limit switch
GfA Elektromaten SI 100.30 FI NHK DES Ø55-Safedrive® with Integrated Frequency Inverter 1000Nm with Emergency Hand Crank
SI-ELEKTROMATEN, with integrated frequency inverter, drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 1000Nm, output speed up to 30 rpm, hollow-shaft-Ø 55mm, supply voltage 3~550V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.
GfA Elektromaten SI 17.15 NHK DES Ø40-Safedrive® 170Nm with Emergency Hand Crank
SI-ELEKTROMATEN, Drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 170Nm, output speed 15 rpm, hollow-shaft-Ø 40mm, supply voltage 3~230V/400V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.Description:The GfA SI-ELEKTROMATEN "Safedrive" are special drives for industrial doors than require an anti-fallback device.Features:Patented safety brake built into the gearAll models operate with a manual override on an emergency hand crankAll models contain a digital limit switchSupply voltage 3~230V/400V
GfA Elektromaten SI 75.24 NHK DES Ø55-Safedrive® 750Nm with Emergency Hand Crank
SI-ELEKTROMATEN, Drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 750Nm, output speed 24 rpm, hollow-shaft-Ø 55mm, supply voltage 3~230V/400V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.Description:The GfA SI-ELEKTROMATEN "Safedrive" are special drives for industrial doors than require an anti-fallback device.Features:Patented safety brake built into the gearAll models operate with a manual override on an emergency hand crankAll models contain a digital limit switchSupply voltage 3~230V/400V
GfA Elektromaten SIK 17.10 NHK DES Ø30-Safedrive® 170Nm with Emergency Hand Crank
SI-ELEKTROMATEN, Drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 170Nm, output speed 10 rpm, hollow-shaft-Ø 30mm, supply voltage 3~230V/400V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=10 revolutions max.Description:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
MFZ Marantec Ovitor SDO-35-21-45 E FU HD AWG 400V/3PH Ø35-Slidng door drive 210Nm with CS320 FU control unit
Drive with frequency converter and quick release mechanism for use on sliding doors, drive output torque 210Nm, drive speed 45 rpm, output shaft Ø 35mm, includes brakes, with digital limit switch / absolute rotary encoder AWG, limit switch ratio 1:2 (76ES), supply voltage 400V/3~, supply frequency 50Hz, includes CS 320 FU control unitDescription:The sliding gate drives of the SDO series from MFZ Marantec Ovitor are characterized by their compact design, ensuring the best options for installation. The convenient emergency release is integrated as standard and therefore offers the safest solution for the gate. The powerful electric motor with integrated brake and the CS320 FU control unit were especially developed for sliding gates, optimally adapted to the requirements in this area. With a complete range from 80 to 330Nm, MFZ Marantec Ovitor offers the best solution for any on-site condition.Technical characteristics:• For mains operation with power supply of 230 / 400V / 3~, 230V / 1~• Rotating shaft pluggable on both sides• Foot or flange installation• Emergency operation by means of emergency release (E)• End position settings via electronic absolute rotary encoder AWG• Thermal protection in the motor winding
MFZ Marantec Ovitor MDF-50-75-10 KU HD AWG Ø50-Drive with Safety-Brake 750Nm with Emergency Hand Crank
Drive with integrated safety brake for use on rolling doors, torque 750Nm, max. 10 rpm, hollow-shaft diameter 50mm, with emergency hand crank for manual operation, power supply 400V/3~/50Hz, digital limit switch AWG, limit switch range 18 rotations max.Description:The direct mount drive of the MDF series from MFZ Marantec Ovitor are distinguished by their compact build, which allows for the best possible installation. The maintenance-free safety brake is already integrated, offering therefore the best safety solution for the door. With a complete range from 100 to 2000 Nm, MFZ offers the right solution for every on-site situation in this field.Features:- Integrated safety brake, independent of position and speed, maintenance-free and wear-resistant, integrated shock-absorbers- Self-aligning bearings- Emergency operation with emergency hand crank (KU), also available with emergency hand chain (KE) upon request- Easily converted from crank to chain.- End position adjusted via electronic absolute encoder (mechanical limit switches MEC available upon request)- Thermal protection built into the motor - Plug-in connectors
GfA Elektromaten SI 25.35 NHK DES Ø30-Safedrive® 250Nm with Emergency Hand Crank
SI-ELEKTROMATEN, Drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 250Nm, output speed 35 rpm, hollow-shaft-Ø 30mm, supply voltage 3~230V/400V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.Description:The GfA SI-ELEKTROMATEN "Safedrive" are special drives for industrial doors than require an anti-fallback device.Features:Patented safety brake built into the gearAll models operate with a manual override on an emergency hand crankAll models contain a digital limit switchSupply voltage 3~230V/400V
MFZ Marantec Ovitor SDO-35-13-45 E FU HD AWG 230V/1PH Ø35-Slidng door drive 130Nm with CS320 FU control unit
Drive with frequency converter and quick release mechanism for use on sliding doors, drive output torque 130Nm, drive speed 45 rpm, output shaft Ø 35mm, includes brakes, with digital limit switch / absolute rotary encoder AWG, limit switch ratio 1:2 (76ES), supply voltage 230V/1~, supply frequency 50Hz, includes CS 320 FU control unitDescription:The sliding gate drives of the SDO series from MFZ Marantec Ovitor are characterized by their compact design, ensuring the best options for installation. The convenient emergency release is integrated as standard and therefore offers the safest solution for the gate. The powerful electric motor with integrated brake and the CS320 FU control unit were especially developed for sliding gates, optimally adapted to the requirements in this area. With a complete range from 80 to 330Nm, MFZ Marantec Ovitor offers the best solution for any on-site condition.Technical characteristics:• For mains operation with power supply of 230 / 400V / 3~, 230V / 1~• Rotating shaft pluggable on both sides• Foot or flange installation• Emergency operation by means of emergency release (E)• End position settings via electronic absolute rotary encoder AWG• Thermal protection in the motor winding
GfA Elektromaten SI63 5.250 FI NHK DES Ø31,75-Safedrive® with Integrated Frequency Inverter 50Nm with Emergency Hand Crank
SI-ELEKTROMATEN, with integrated frequency inverter, drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 50Nm, output speed up to 250 rpm, hollow-shaft-Ø 31,75mm, supply voltage 1N~230V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.
GfA Elektromaten SE 9.30 SK DES Ø25,4-Drive for Sectional Doors 90Nm Emergency Hand Chain
SE-ELEKTROMATEN, Drive for counter balanced sectional doors, output torque 90Nm, output speed 30 rpm, max. door weight 4000 N, supply voltage 3~230V/400V, hollow shaft diameter 25,4mm, with emergency hand chain for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.Description:The GfA Elektromaten SE 9.30 SK DES sectional door drive with an output torque of 90Nm and an output speed of 30rpm is a drive for counterbalanced sectional doors.Normally installed on directly the door shaftWith digital limit switch DES ensuring parameters do not need resetting following a power failureEmergency manual override with rapid hand chain operatorMaximum door weight: 4000NSupply voltage 3~230V/400V
GfA Elektromaten SI 100.10 NHK DES Ø55-Safedrive® 1000Nm with Emergency Hand Crank
SI-ELEKTROMATEN, Drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 1000Nm, output speed 10 rpm, hollow-shaft-Ø 55mm, supply voltage 3~230V/400V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.Description:The GfA SI-ELEKTROMATEN "Safedrive" are special drives for industrial doors than require an anti-fallback device.Features:Patented safety brake built into the gearAll models operate with a manual override on an emergency hand crankAll models contain a digital limit switchSupply voltage 3~230V/400V
MFZ Marantec Ovitor SDO-35-33-24 E FU HD AWG 230V/1PH Ø35-Slidng door drive 330Nm with CS320 FU control unit
Drive with frequency converter and quick release mechanism for use on sliding doors, drive output torque 330Nm, drive speed 24 rpm, output shaft Ø 35mm, includes brakes, with digital limit switch / absolute rotary encoder AWG, limit switch ratio 1:2 (76ES), supply voltage 230V/1~, supply frequency 50Hz, includes CS 320 FU control unitDescription:The sliding gate drives of the SDO series from MFZ Marantec Ovitor are characterized by their compact design, ensuring the best options for installation. The convenient emergency release is integrated as standard and therefore offers the safest solution for the gate. The powerful electric motor with integrated brake and the CS320 FU control unit were especially developed for sliding gates, optimally adapted to the requirements in this area. With a complete range from 80 to 330Nm, MFZ Marantec Ovitor offers the best solution for any on-site condition.Technical characteristics:• For mains operation with power supply of 230 / 400V / 3~, 230V / 1~• Rotating shaft pluggable on both sides• Foot or flange installation• Emergency operation by means of emergency release (E)• End position settings via electronic absolute rotary encoder AWG• Thermal protection in the motor winding
MFZ Marantec Ovitor MDF 20-15-12 HD KU AWG Ø30-Drive with Safety-Brake 150Nm with Emergency Hand Crank
Drive with integrated safety brake for use on non-balanced sectional doors or rolling doors, torque 150Nm, max. 12 rpm, hollow-shaft diameter 30mm, with emergency hand crank for manual operation, power supply 3~400V, digital limit switch AWG, limit switch range 18 rotations max.Description:The direct mount drive of the MDF series from MFZ Marantec Ovitor are distinguished by their compact build, which allows for the best possible installation. The maintenance-free safety brake is already integrated, offering therefore the best safety solution for the door. With a complete range from 100 to 2000 Nm, MFZ offers the right solution for every on-site situation in this field.Features:- Integrated safety brake, independent of position and speed, maintenance-free and wear-resistant, integrated shock-absorbers- Self-aligning bearings- Emergency operation with emergency hand crank (KU), also available with emergency hand chain (KE) upon request- Easily converted from crank to chain.- End position adjusted via electronic absolute encoder (mechanical limit switches MEC available upon request)- Thermal protection built into the motor - Plug-in connectors
GfA Elektromaten SI 180.12 FI NHK DES Ø60-Safedrive® with Integrated Frequency Inverter 1800Nm with Emergency Hand Crank
SI-ELEKTROMATEN, with integrated frequency inverter, drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 1800Nm, output speed up to 12 rpm, hollow-shaft-Ø60mm, supply voltage 3~400V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=10 revolutions max.
Novoferm tormatic Sectional Door Drive SE9.24 SK with Control T100
Drive set for counter-balanced sectional doors, emergency hand chain for manual operation, output torque 90 Nm, max. door weight 400 kg, output speed 24 rpm, 25.4mm hollow shaft, 400 V, set contains: NovoShaft 9.24 SK drive with digital limit switch, door control unit T100 DES, universal torque support bracket, 5m motor cable
MFZ Marantec Ovitor SDO-35-13-45 E FU HD AWG 400V/3PH Ø35-Slidng door drive 130Nm with CS320 FU control unit
Drive with frequency converter and quick release mechanism for use on sliding doors, drive output torque 130Nm, drive speed 45 rpm, output shaft Ø 35mm, includes brakes, with digital limit switch / absolute rotary encoder AWG, limit switch ratio 1:2 (76ES), supply voltage 400V/3~, supply frequency 50Hz, includes CS 320 FU control unitDescription:The sliding gate drives of the SDO series from MFZ Marantec Ovitor are characterized by their compact design, ensuring the best options for installation. The convenient emergency release is integrated as standard and therefore offers the safest solution for the gate. The powerful electric motor with integrated brake and the CS320 FU control unit were especially developed for sliding gates, optimally adapted to the requirements in this area. With a complete range from 80 to 330Nm, MFZ Marantec Ovitor offers the best solution for any on-site condition.Technical characteristics:• For mains operation with power supply of 230 / 400V / 3~, 230V / 1~• Rotating shaft pluggable on both sides• Foot or flange installation• Emergency operation by means of emergency release (E)• End position settings via electronic absolute rotary encoder AWG• Thermal protection in the motor winding
Novoferm Tormatic NovoShaft 5.24 SK DES Ø25,4-Drive for Sectional Doors 50Nm Emergency Hand Chain
Industrial Door Drive for counter balanced rolling or sectional doors, output torque 50 Nm, output speed 24 rpm, max. door weight 2500N, hollow shaft diameter 25,4mm, with emergency hand chain for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.Description:Novoferm Tormatic Novoshaft 5.24 SK sectional door drive with an output torque of 50Nm and an output speed of 24 rpm is a drive for counterbalanced sectional doorsNormally installed directly on the door shaftWith digital limit switch DES, no need to reset the parameters following a power failureEmergency manual override with rapid hand chain operatorMax. door weight 2500NSupply voltage 3~230V/400V
GfA Elektromaten KE 120.24 NHK DES Ø55-Chain Drive for Doors 1200Nm with Emergency Hand Crank
KE-ELEKTROMATEN, Drive for chain driven roller shutters or rolling grilles, output torque 1200Nm, output speed 24 rpm, supply voltage 3~230V/400V, with emergency hand crank for manual operation, Attention: The sprocket is not included and can be ordered separately, digital limit switch DES, limit switch range E=20 revolutions max.Description:The GfA KE ELEKTROMATEN chain drives are special drives for industrial doors. The door shaft drive is operated by a chain transmission. For applications which require an anti-fallback device a separate safety brake is required.KE ELEKTROMATEN consists of:Electric motorWorm gearPluggable output shafts for installations on left and right sidesEmergency manual overrideIntegrated limit switch
GfA Elektromaten SI63 13.100 FI NHK DES Ø25,4-Safedrive® with Integrated Frequency Inverter 130Nm with Emergency Hand Crank
SI-ELEKTROMATEN, with integrated frequency inverter, drive for non-balanced doors which require an anti-fallback device, the patented safety brake is built into the gear, output torque 130Nm, output speed up to 100 rpm, hollow-shaft-Ø 25,4mm, supply voltage 1N~230V, with emergency hand crank for manual operation, digital limit switch DES, limit switch range E=20 revolutions max.
Torantriebe für Industrietore
Industrietorantriebe dienen zum elektrischen Öffnen und Schließen von speziellen Toren, die in gewerblichen oder industriellen Umgebungen verwendet werden. Diese Industrietore regeln den Zugang zu Lagerhallen, Fabriken, Logistikzentren und anderen industriellen Einrichtungen. Im Gegensatz zu gewöhnlichen Toren sind Industrietore in der Regel größer, robuster und für den Einsatz in anspruchsvollen Umgebungen ausgelegt. Je nach den spezifischen Anforderungen des Standorts können diese Tore verschiedene Bauformen haben.
Typische Torantriebe im gewerblichen und industriellen Bereich sind:
- Rolltorantriebe: Rolltore sind besonders platzsparend, robust und für hohe Torfrequenzen geeignet. Sie werden auch oft an Parkhäusern und Sammelgeragen verbaut. Eine spezielle Ausführungsform dieses Tortyps sind Rollgittertore, die bei geschlossenem tor eine Belüftung zulassen.
- Sektionaltorantriebe: Sektionaltore sind der Standard in Betriebshallen, Werkstätten, Lagerhallen und anderen Industriegebäuden. Diese Tore sind wirtschaftlich in der Anschaffung und ermöglichen einen sicheren und zuverlässigen Torbetrieb.
- Schiebetorantriebe: Schiebetore werden oft in Zufahrten zu gewerblichen oder instriellen Bereichen eingesetzt. Hier sind die Schiebetore besonders lang, da oft zwei Fahrspuren abgedeckt werden und auch LKW-Betrieb recht üblich ist. Entsprechend sind Schiebetore im industriellen Bereich besonders groß und schwer und werden mit speziellen Antriebssystemen bewegt.
Torantriebe für den privaten Bereich
Sektionaltor- bzw. Garagentorantriebe: Sektionaltore sind die klassische Lösung für Einzel-, Doppel- oder Sammelgaragen. Dieser Tortyp ist platzsparend, wirtschaftlich und relativ einfach zu automatisieren.
Schiebetorantriebe: Schiebetore werden oft an breiteren Zufahrten installiert und sind robust und langlebig. Die Torbewegung erfolgt hier horizontal, daher sind Schiebetore platzsparender als Drehtore.
- Drehtorantriebe: Drehtore sind als ein- oder zweiflügelige Konstruktion verfügbar und werden oft an Zufahrten zu privaten Wohngebäuden verbaut. An diesen Toren können Torantriebe recht einfach auch im Nachhinein nachgerüstet werden.
Wichtige Punkte bei Auswahl und Kauf eines Torantriebs - Was sollte man beachten?
1. Einsatzbereich: Privat oder Industrie?
Die Belastung unterscheidet sich deutlich. Industrietore sind schwerer und werden in der Regel häufiger bewegt. Entsprechend sind Industrietorantriebe robuster und leistungsstärker.
2. Torart und -größe: Sektional-, Roll-, Schiebe- oder Drehtor?
Jede Torart hat spezielle Anforderungen und belastet die Antriebsmechanik unterschiedlich. Daher ist es wichtig den Antrieb speziell passend für den jeweiligen Tortypen auszuwählen.
3. Leistung und Häufigkeit: Wie groß und schwer ist das Tor und wie oft wird es bewegt?
Je größer und häufiger das Tor genutzt wird, desto stärker sollte der Motor ausgelegt sein.
4. Sicherheit: Welche Funktionen werden benötigt?
Funktionen wie Hinderniserkennung, Notentriegelung, automatische Auf- und/ oder Zufahrt, intergierte Fangvorrichtung oder Peripheriegeräte sollten bei der Auswahl des Automatisierungssystems bedacht werden.
5. Komfort und Steuerung: Automatikbetrieb, Funk oder Smarthome?
Funkhandsender, App-Bedienung oder Smart-Home-Anbindung machen den Alltag leichter.