Sensors

Hekatron ORS 142, Optical smoke and thermal switch, detection of smouldering fires and open fires with smoke development, for wall or ceiling mounting, for control of hold-open control unitsDescription:The optical smoke switch ORS 142 from Hekatron offers a solid solution for fire detection. With its optical operation indicator, Contamination compensation and processor control, it ensures a high level of safety. The ORS 142 is specifically designed for the detection of smoldering and open fires with smoke generation, as well as the control of hold-open control units. Technical features: Optical contamination/condition indication for easy monitoring. Processor control for accurate fire detection. Suitable for smoldering and open fires with smoke generation. Ideal for control of hold-open control unit Replacement indicator according to DIN 14677 Optional integrated circuit monitoring Extended temperature range for down to -30 °C Measuring chamber monitoring Communication port for RSBus Potential-free normally closed contact Thermocouple for tripping at ambient temperature above 70 °C With dust protection cap The sensor replacement indicator automatically indicates the replacement of the detector after 8 years as required by DIN 14677. Choose the Hekatron ORS 142 for reliable fire detection and maximum safety!

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 0,5m/0,5m, with Molex-plugsDescription:The FRABA VITECTOR OSE-S 6600 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 0.5 m and receiver - 0.5 m) and pre-assembled GfA plugs. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 6,5m/0,5m, with Molex-plugsDescription:The FRABA VITECTOR OSE-S 6601 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 6.5 m and receiver - 0.5 m) and pre-assembled GfA plugs. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Airwave switch, normally open contact, with screw terminalsDescription:The FRABA VITECTOR DW3S-100 airwave switch converts the pressure wave from a signal transmitter (e.g. push button, rubber pressure sensing strip, rubber profile) into an electrical switching signal. These FRABA VIECTOR airwave switches are installed in the most diverse applications.Properties:Contact type: Normally Closed Contact (NCC), closes upon contact with the switching mechanismWith screw connection

airwave switch DW40Description:The Bircher Reglomat DW40 airwave switch converts the airwaves from a signal generator (pushbutton, floor-mounted pressure sensing strip, rubber profile) into an electrical switching signal. Just light pressure of 3 or 4 mbar is enough to ensure the switch generates an electrical signal. Bircher Reglomat's DW-switches have proven reliable millions of times and are installed in a wide variety of applications.Properties Contact type: Normally Open Contact (NOC), closes upon contact with the switching mechanismWith connecting terminals and latch plates 6.3mm

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 6,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6501 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 6.5 m and receiver - 0.5m). The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 10,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6502 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 10.5 m and receiver - 0.5m). The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Radar motion detector for industrial doors, people and vehicle filter, supply voltage 12-30 VDC / 12-24 VACDescription:The Herkules 2E radar detector from Bircher has been specially developed for use on industrial doors. With a mounting height of up to 7m and adjustable directional and cross-traffic detection, it is suitable for most applications involving the automated opening of industrial gates.FeaturesFast response time: The Bircher Herkules 2E is characterised by its lightning-fast response time, making it ideal for use on high-speed doors. Precise detection of people and vehicles enables smooth and efficient gate opening and closing.Adaptable for heights from 2 to 7 metres: With a detection height of up to seven metres, the Herkules 2E seamlessly adapts to a wide range of door heights. This flexibility ensures wide applicability in various industrial environments.Directional detection and cross traffic blanking: Thanks to its intelligent direction detection, the Herkules 2E activates the door opening in a targeted manner and optimises the traffic flow. It also minimises false activations through its cross-traffic blanking function, avoiding unnecessary openings.User-friendly installation and programming: With two independently programmable outputs, the Herkules 2E offers maximum flexibility for different applications. Simple programming and user-friendly operation make it easy to use in different applications.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, with Diagnose-LED, PVC-cable, cable length 10,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6702 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 10.5 m and receiver - 0.5 m). Through an LED at the back of the transmitter, the operating status of the sensing edge is always clearly visible. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Radar motion detector for opening and reversing of doors, unidirectional motion detection, adjustable via remote (separate accessory), IP65 rated, people and cross-traffic filter, 10m cable, installation height 2 - 3,5mDescription:The BEA Falcon XL is a radar motion detector for use in automatic doors. The Falcon detects all movement in the monitored area and can filter people or cross-traffic movement if necessary. Concealing parallel traffic helps to minimise unnecessary opening of the doors. Mounted at a height of 3.5m, the BEA Falcon XL has a detection field of 4 x 2m.Properties:Direction recognition helps to reduce the number of opening cycles, saving energy costs.Filtering people to detect vehicles onlyConcealing cross-traffic to reduce the number of unwanted openingsSimple installation and parameter setup via remote control (optional accessory)

Radar motion detector for opening and reversing of doors, unidirectional motion detection, adjustable via remote (separate accessory), IP65 rated, people and cross-traffic filter, 10m cable, installation height 3,5 - 7mDescription:The BEA Falcon is a radar motion detector for use in automatic doors. The Falcon detects all movement in the monitored area and can filter people or cross-traffic movement if necessary. Concealing parallel traffic helps to minimise unnecessary opening of the doors. Mounted at a height of 7m, the BEA Falcon has a detection field of 4 x 5m.Properties:Direction recognition helps to reduce the number of opening cycles, saving energy costsFiltering people to detect vehicles onlyConcealing cross-traffic to reduce the number of unwanted openingsSimple installation and parameter setup via remote control (optional accessory)

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, with Diagnose-LED, PVC-cable, cable length 6,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6701 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 6.5 m and receiver - 0.5 m). Through an LED at the back of the transmitter, the operating status of the sensing edge is always clearly visible. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Control unit for optical sensing edges OSE, relay output (stop and reverse), monitors up to 2 sensing edges, supply voltage 230 V AC, rated Cat. 3 PL c (EN 13849-1)Description:The FRABA VITECTOR OSE-C 2300 is a control unit for optical sensing edges on doors. The control unit can monitor and evaluate up to two optical sensing edges type (FRABA VITECTOR OSE) or two pull-in protection devices (type FRABA VITECTOR RAYTECTOR). Thereby, the security signal of the sensors can be converted via the evaluation of the OSE-C 2300 into a potential-free NC relay contact. As well as the safety output, the OSE-C2300 also delivers a NO relay contact which e.g. can be used to reverse the door when operating the safety edge.Several relay outputs (stop and reverse)Monitors up to 2 OSE sensing edges or pull-in protection devicesHousing unit protection class: IP65Supply voltage: 230V ACSafety category: Cat.3 PL according to EN13849-1

Dual-Technology sensor for opening/ reversing doors and for presence detection, radar motion detector and active-IR-presence detector in one product, 2 IR-curtains (2 x 24 Active IR spots) to monitor an area in front of the door, adjustable via LCD-Display or remote (separate accessory), 10m cable, max. installation height 3,5mDescription:The IXIO-DT3 combines radar technology to open with infrared technology for the protection of automatic linear sliding doors and telescoping / revolving doors. It can be used both for escape routes and emergency exits, as well as for standard doors.Unidirectional - lowers the duration of the opening cycle because it masks cross-traffic movement48 infrared spots distributed over 2 curtains avoid anyone coming into contact with the doorIntuitive settings on an LCD screenConforms to EN16005/ DIN18650ESPE Type 2 conforms to IEC61496-1:2012 and PL c/ Cat. 2 conforms to EN ISO 13849-1:2008

Radar motion detector for opening and reversing of doors, adjustable via remote (separate accessory), IP65 rated, people and/ or cross-traffic filter, installation height up to 7mDescription:The radar motion detector MWD BP-C by FEIG Electronic is used to open gates, barriers arms, etc. The two-channel device allows detection and suppression of vehicles and / or people.Properties:Two-channel device allows vehicle and / or person recognitionPlanar Microwave Technologycross-traffic suppressionobject trackingVarious relay functionsPreconfigured comfort profiles for typical door applicationsSettings by buttons on the device or by optionally available remote control MWD RC

Laser Scanner for opening and presence detection on barrier arms: complete coverage over 4 planes (16560 measurements per second), adjustable via remote control (separate accessory), IP65 rated, dynamic teach-in, object-recognition, quick installation without having to open concrete floors, max. range 9,9m x 9,9mDescription:The BEA LZR®-H110 is a horizontal scanner especially developed for installation in barrier systems. The laser scanner offers a real alternative to induction loops:Saves time during installation, as digging or excavating the concrete is not necessaryDetects vehicle types through time-of-flight measurement.Great adaptability via adjustable detection fields, and opening and monitoring functionsBased on laser technology, the LZR-H100 sensor was especially developed for the opening, protection, and presence detection of automatic barriers. It offers two separate adaptable detection areas with separate outputs. This way, when managing the barrier system, an opening command can be given as a vehicle enters the opening area, and a hold-open command can be given when it has stopped in the detection field. The width and depth of the detection fields can also be extremely flexible and can be set up to a maximum of 9.9 m x 9.9 m.Properties:Double function: opening upon relevant movements, presence detection for protectionDetection of any type of vehicle, cars, electric vehicles, trucks, commercial vehicles...Easy installation: can be installed without extensive work on the flooringRecognition of the direction of travel: The scanner activates the barrier when vehicles are approaching or departingPedestrian filter: The presence of pedestrians in the opening area can be masked by a software filter.Max. detection range up to 9.9 m x 9.9 m.

Coil Core fixed, for mounting on the door, dimensions 39 mm x 27 mm x 40 mm

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, with Diagnose-LED, PVC-cable, cable length 0,5m/0,5m, with Molex-plugsDescription:The FRABA VITECTOR OSE-S 6800 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 0.5 m and receiver - 0.5 m) and pre-assembled GfA plugs. Through an LED at the back of the transmitter, the operating status of the sensing edge is always clearly visible. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

reflective photo eye, max. range 9m, supply voltage 24 ... 240 V AC/ 12 ... 240 V DC, signal output: changeover relay, IP67 rated, 2m connection cableDescription:Universal Reflective Photo-eye barrier for contactless protection of industrial doors. The light barrier works on an extremely wide supply voltage range and through the execution of the output signal as a changeover relay (Normally Closed Contact and Normally Open Contact), it is compatible with most door control units.The photo-eye sensor works with visible red lights (630nm wavelength) and has a built-in polarisation filter. Through this, the photo-eye sensor is extremely impervious to external light and is easy to install.Coverage up to 9mUniversal power supply voltage AC 24 to 240V, DC 12 to 220V2m connection leadRelay output (changeover)

Airwave switch, normally closed contact, with screw terminalsDescription:The FRABA VITECTOR DW3O-100 airwave switch converts the pressure wave from a signal transmitter (e.g. push button, floor contact wave, threshold tread-mat, rubber contact strip) into an electrical switch signal. These airwave switches from FRABA VIECTOR are installed into the most diverse applications.Properties:Contact type opener, opens upon contact with the switching mechanismWith screw connection

Product description: certified E-device acc. to EN 12453:2017, for doors with a max. closing speed of 1,6 m/s and max. opening speed of 3 m/s, door blanking function, PNP/NPN- and FSS/ OSE-output, with protection field height of 2500mm, sensor length 2420 mm, number of beams 22, resolution/beam spacing: 50 mm in the lower area up to 500 mm, above that 185 mm; incl. 10,0m synch-cable and 5,0m connection cable CEDES model designation: Gridscan/ Pro SY-2500-22   GridScan/Pro - Reliable SIL 2-certified safety light curtain for industrial doorsDiscover an innovative solution for the highest safety standards on industrial doors with the GridScan/Pro from CEDES. The SIL2-certified GridScan/Pro light curtain with TÜV type approval can be used on all doors and is also ideal for modernisation projects.Features:Versatile integration: the GridScan/Pro's multi-output design enables seamless integration into various door control units. The switchable operating mode from blanking to static operation extends the applicability of the light curtain and ensures that it can be flexibly adapted to the requirements of different door systems.Direct installation: The GridScan/Pro can be installed directly into the guide rail of the door, enabling efficient door blanking. This ensures precise and simple alignment for maximum safety.Versatile outputs: The combined output with PNP/NPN (push-pull) and FSS/ OSE offers a wide range of connection options. A second output provides additional information and increases the flexibility of the system.Modernisation projects: The GridScan/Pro from CEDES is ideal for modernisation projects and can also be used on older door control units with an optional OSE Monitoring unit / Evaluation unit. This enables efficient and cost-effective upgrading of existing door systems to the latest safety standards.High speeds: The sensor's high processing speed means it can be used for door speeds of up to 1.6 m/s. This makes the GridScan/Pro Light curtain perfect for applications with high-speed doors, sectional doors, rolling doors and many other door types.SIL 2 without test: The fulfilment of SIL 2 without test when selecting the FSS output underlines the high safety level of this light curtain

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 10,5m/0,5m, with Molex-plugsDescription:The FRABA VITECTOR OSE-S 6602 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 10.5 m and receiver - 0.5 m) and pre-assembled GfA plugs. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

loop detector for 2 loops, 100 - 240VAC