D+H CDC-0252-0500-1-ACB M1-R chain drive 24 V 250 N 500 mm

The D+H BS-CDC-PA01-M-VFO is a bracket set for surface-mounted frame installation of CDC chain drives on outwards-opening façade windows. Installation is carried out on the window frame and is suitable for standard window profiles.This high-quality bracket set enables secure and precise fixing of the drive. All fasteners required for installation are included in the scope of delivery. Instructions for correct installation can be found in the D+H application drawings and product information.FeaturesBracket set for CDC chain drivesSurface-mounted installation on the window frameFor outwards-opening façade windowsSuitable for standard window profilesHigh-quality and corrosion-resistant materialsIncludes all necessary fixing materialsTechnical dataInstallation type: Surface-mounted frame installationWindow type: Outward-openingSash bracket: Die-cast aluminium, powder-coatedSash bracket colour: White aluminium (similar to RAL 9006)Frame bracket: V2A stainless steelFrame bracket finish: TrowalisedScope of supplyBracket setComplete fixing set for installation

The D+H BS-CDC-PI01-M-VFI is a bracket set for surface-mounted installation of CDC chain drives on inwards-opening façade windows. Installation takes place on the window frame and is suitable for standard window profiles.This high-quality bracket set enables secure and precise fixing of the drive. All fasteners required for installation are included in the scope of delivery. Instructions for correct installation can be found in the D+H application drawings and product information.FeaturesBracket set for CDC chain drivesSurface-mounted installation on the window frameFor inwards-opening façade windowsSuitable for standard window profilesHigh-quality and corrosion-resistant materialsIncludes all necessary fixing materialsTechnical dataInstallation type: Surface-mounted frame installationWindow type: Inward-openingSash bracket: Die-cast aluminium, powder-coatedSash bracket colour: White aluminium (similar to RAL 9006)Frame bracket: V2A stainless steelFrame bracket finish: TrowalisedScope of supplyBracket setComplete fixing set for installation

The D+H BS-CDC-PI01-O-VSI is a bracket set for surface-mounted sash installation of CDC chain drives on inwards-opening façade windows. Installation takes place on the sash frame and is suitable for standard window profiles.This high-quality bracket set enables the drive to be secured safely and with a precise fit. All fasteners required for installation are included in the scope of delivery. Instructions for correct installation can be found in the D+H application drawings and product information.FeaturesBracket set for CDC chain drivesSurface-mounted sash installationFor inwards-opening façade windowsSuitable for standard window profilesSash and frame brackets made from die-cast aluminiumIncludes all necessary fixing materialsTechnical dataInstallation type: Surface-mounted sash installationWindow type: Inward-openingSash bracket: Die-cast aluminium, powder-coatedFrame bracket: Die-cast aluminium, powder-coatedColour: White aluminium (similar to RAL 9006)Scope of supplyBracket setComplete fixing set for installation

The D+H CDC-BS076-VFO is a bracket set for surface-mounted frame installation of CDC chain drives on out-opening windows. It is fitted to the window frame and is suitable for selected window profiles. Details regarding profile compatibility can be found in the D+H product data sheet. :contentReference[oaicite:0]{index=0}The bracket set is specifically designed to ensure secure and precise fixing of the drive. The complete set includes a sash bracket for screw fixing in the rebate area with fasteners visible from the outside. The design also allows the chain to be disengaged even when the window sash is closed. Instructions for correct installation can be found in the D+H application drawings and product information. :contentReference[oaicite:1]{index=1}FeaturesBracket set for CDC chain drivesSurface-mounted installation on the window frameFor outwards-opening windowsComplete kit for drive installationSash bracket for screw fixing in the rebate areaFixings visible from the outsideChain can be disengaged even when the window sash is closedInstallation in accordance with D+H application drawings and product informationTechnical dataInstallation type: Surface-mounted frame installationWindow type: Outward-openingInstallation position: Window frameProfile compatibility: See D+H product sheetScope of supplyD+H CDC-BS076-VFO bracket setSash bracketAll necessary fasteners

The D+H CPS-B1-2.5-0101 is a compact smoke and heat extraction (RWA) control unit from the Basic series. With an output of 24 V DC / 2.5 A, one detector line and one actuator group, it is ideally suited for small to medium-sized smoke and heat extraction systems in public, commercial and industrial buildings. The control unit provides a stabilised 24 V output voltage and features an integrated emergency power supply for up to 72 hours (with separately available rechargeable batteries). Up to 8 smoke and heat extraction control points and 8 approved fire detectors can be connected per line. In addition to standard smoke and heat extraction functions, the control unit offers numerous safety and convenience features. These include circuit monitoring for short circuits and open circuits, remote reset of smoke detectors, smoke and heat extraction night-time operation, and switchable safety functions. Furthermore, the control unit can be used for daily comfort ventilation. The ventilation time can be set directly on the control unit. A wind or rain sensor can be connected directly without the need for additional extensions. The D+H CPS-B1-2.5-0101 meets the requirements of modern smoke extraction systems and is certified in accordance with ISO 21927-9, DIN EN 12101-10, VdS 2581, VdS 2593, VdS 2344, EN 62368-1 and the building regulations requirements of DIN 18232-9. Features Basic smoke and heat extraction control unit for 24 V DC systems Output power: 2.5 A 1 detector line and 1 actuator group Includes plastic housing with spare key Integrated emergency power supply for 72 hours (batteries available separately) Comfort ventilation function with adjustable ventilation time Connection for wind and rain sensor Circuit monitoring for short circuits and open circuits Remote reset of smoke detectors and night-time activation of smoke and heat extraction systems Tested and certified in accordance with DIN EN 12101-10, ISO 21927-9 and VdS Technical data Supply voltage: 195–253 V AC, 50 Hz Power consumption: 140 VA Standby power consumption: < 2 W Output: 24 V DC / 2.5 A Monitoring operating mode: Continuous operation Alarm/ventilation operating mode: Short-term operation (30 % duty cycle) Channels: 1 Drive groups: 1 Protection class: IP30 Ambient temperature: -5 °C to +40 °C Housing: Plastic Colour: White (similar to RAL 9016) Dimensions (W × H × D): 310 × 310 × 104 mm Scope of delivery D+H CPS-B1-2.5-0101 main circuit board Plastic housing Spare key Excludes rechargeable batteries (rechargeable batteries must be ordered separately) Note: Two suitable rechargeable batteries are required for operation. These are not included in the scope of delivery and must be ordered separately.

The D+H CPS-B1-5-0101 is a high-performance smoke and heat extraction (RWA) control unit from the Basic series. With an output of 24 V DC / 5 A, one detector line and one actuator group, it is ideally suited for small to medium-sized smoke and heat extraction systems with increased power requirements. It ensures reliable control of the connected smoke and heat extraction systems and can also be used for daily comfort ventilation.The control unit provides a stabilised 24 V output voltage and features an integrated emergency power supply for up to 72 hours (with separately available rechargeable batteries). Up to 8 RWA control points and 8 approved fire detectors can be connected per line.In addition to standard smoke and heat extraction functions, the control unit offers numerous safety and convenience features. These include circuit monitoring for short circuits and open circuits, remote reset of smoke detectors, an integrated smoke and heat extraction night-time operation mode, and switchable safety functions. Furthermore, visual and audible alarm devices can be connected. An optional wind or rain sensor can be connected directly to the control unit.The D+H CPS-B1-5-0101 meets the requirements of modern smoke and heat extraction systems and is certified to ISO 21927-9, DIN EN 12101-10, VdS 2581, VdS 2593, VdS 2344, EN 62368-1 and the building regulations requirements of DIN 18232-9.FeaturesBasic smoke and heat extraction control unit for 24 V DC systemsOutput power: 5 A1 detector line and 1 actuator groupIncludes plastic housing with spare keyIntegrated emergency power supply for at least 72 hours (batteries available separately)Convenience ventilation function with adjustable ventilation timeDirect connection of a wind or rain sensor possibleCircuit monitoring for short circuits and open circuitsRemote reset of smoke detectors and RWA night-time activationConnection options for visual and audible alarm devicesTested and certified in accordance with DIN EN 12101-10, ISO 21927-9 and VdSTechnical dataSupply voltage: 195–253 V AC, 50 HzPower consumption: 145 VAStandby power consumption: < 2 WOutput: 24 V DC / 5 AMonitoring operating mode: Continuous operationAlarm/ventilation operating mode: Short-term operation (30 % duty cycle)Channels: 1Drive groups: 1Protection class: IP30Ambient temperature: -5 °C to +40 °CHousing: PlasticColour: White (similar to RAL 9016)Dimensions (W × H × D): 310 × 310 × 104 mmContents of deliveryD+H CPS-B1-5-0101 central circuit boardPlastic housingSpare keyExcludes rechargeable batteries (rechargeable batteries must be ordered separately)Note: Two type 8 rechargeable batteries are required for operation. These are not included in the scope of delivery and must be ordered separately.

The D+H CPS-P1-010-0101-B is a compact smoke and heat extraction control unit for controlling 24 V DC smoke and heat extraction systems. With an output of 24 V DC / 10 A, a detector line and a motor group, it is suitable for smoke extraction and daily ventilation. The integrated emergency power supply ensures reliable operation even in the event of a mains power failure.The control unit supplies an actuator group with up to 10 A. Up to 8 smoke and heat extraction control points and 14 approved fire detectors can be connected per line. Parameterisation is carried out via DIP switches. Features such as line monitoring, dual smoke detector interdependence, RWA night-time operation, comfort ventilation, as well as connections for wind and rain sensors and alarm devices are included.The D+H CPS-P1-010-0101-B meets the requirements of modern smoke and heat extraction systems and is certified in accordance with ISO 21927-9, DIN EN 12101-10, VdS 2581, VdS 2593, VdS 2594, VdS 2344 and the building regulations set out in DIN 18232-9.FeaturesCompact smoke and heat extraction control unit for 24 V DC systemsOutput power: 10 A1 detector line and 1 actuator group72-hour emergency power supply (batteries available separately)Configuration via DIP switchesCircuit monitoring and dual smoke detector interdependenceComfort ventilation functionsConnection for wind and rain sensorsTested in accordance with DIN EN 12101-10, ISO 21927-9 and VdSTechnical dataSupply voltage: 230 V AC, 50 HzPower consumption: 290.7 VAStandby power consumption: < 5 WOutput: 24 V DC / 10 AResidual ripple: < 5 %Protection rating: IP54 (VdS IP30)Ambient temperature: -5 °C to +40 °CHousing: PlasticColour: Light grey (similar to RAL 7035)Dimensions (W × H × D): 300 × 350 × 165 mmBattery type: 2 × Type 18Contents of deliveryD+H CPS-P1-010-0101-B central circuit boardLockable plastic housing with keyWired switching power supplyBatteries not included (Batteries must be ordered separately)

The D+H CPS-P1-020-0202-B is a high-performance smoke and heat extraction control unit for controlling 24 V DC smoke and heat extraction systems. With an output of 24 V DC / 20 A, two detector lines and two actuator groups, it is suitable for larger smoke extraction systems with multiple fire compartments. The integrated emergency power supply and comprehensive smoke and heat extraction and ventilation functions ensure reliable operation.The control unit supplies each drive group with up to 20 A. Up to 8 smoke and heat extraction control points and 14 approved fire detectors can be connected per line. Parameterisation is carried out via DIP switches. Features such as cable monitoring, dual smoke detector interlock, smoke and heat extraction post-operation, comfort ventilation and connections for wind and rain sensors are included.The D+H CPS-P1-020-0202-B meets the requirements of modern smoke and heat extraction systems and is certified in accordance with ISO 21927-9, DIN EN 12101-10, VdS 2581, VdS 2593, VdS 2594, VdS 2344 and the building regulations set out in DIN 18232-9.FeaturesCompact smoke and heat extraction control unit for 24 V DC systemsOutput power: 20 A2 detector lines and 2 actuator groups72-hour emergency power supply (batteries available separately)Configuration via DIP switchesCircuit monitoring and dual smoke detector interdependenceComfort ventilation functionsConnection for wind and rain sensorsTested in accordance with DIN EN 12101-10, ISO 21927-9 and VdSTechnical dataSupply voltage: 230 V AC, 50 HzPower consumption: 550 VAStandby power consumption: < 5 WOutput: 24 V DC / 20 AMonitoring operating mode: Continuous operationAlarm/ventilation operating mode: Short-term operation (30% duty cycle)Lines: 2Drive groups: 2Protection rating: IP54Ambient temperature: -5 °C to +40 °CHousing: PlasticColour: Light grey (similar to RAL 7035)Dimensions (W × H × D): 400 × 500 × 245 mmScope of supplyD+H CPS-P1-020-0202-B central circuit boardLockable plastic housing with keyWired switching power suppliesTerminal blocks for mains connectionWithout rechargeable batteries (rechargeable batteries must be ordered separately)

The D+H CPS-P1-040-0202-B is a high-performance smoke and heat extraction control unit for controlling 24 V DC smoke and heat extraction systems. With an output of 24 V DC / 40 A, two detector lines and two actuator groups, it is suitable for larger smoke extraction systems with high power requirements. The integrated emergency power supply and comprehensive smoke and heat extraction and ventilation functions ensure reliable operation.The control unit provides a total of 40 A of output power, with each drive group capable of handling up to 20 A. Up to 8 smoke and heat extraction control points and 14 approved fire detectors can be connected per line. Parameterisation is carried out via DIP switches. Features such as cable monitoring, dual smoke detector interlock, smoke and heat extraction night-time operation, comfort ventilation and connections for wind and rain sensors are included.The D+H CPS-P1-040-0202-B meets the requirements of modern smoke and heat extraction systems and is certified in accordance with ISO 21927-9, DIN EN 12101-10, VdS 2581, VdS 2593, VdS 2594, VdS 2344 and the building regulations set out in DIN 18232-9.FeaturesCompact smoke and heat extraction control unit for 24 V DC systemsTotal output power: 40 A2 detector lines and 2 actuator groups72-hour emergency power supply (batteries available separately)Configuration via DIP switchesCircuit monitoring and dual smoke detector interlockComfort ventilation functionsConnection for wind and rain sensorsTested in accordance with DIN EN 12101-10, ISO 21927-9 and VdSTechnical dataSupply voltage: 230 V AC, 50 HzPower consumption: 1010 VAStandby power consumption: < 6 WOutput: 24 V DC / 40 AMonitoring operating mode: Continuous operationAlarm/ventilation operating mode: Short-term operation (30% duty cycle)Lines: 2Drive groups: 2Protection rating: IP54Ambient temperature: -5 °C to +40 °CHousing: PlasticColour: Light grey (similar to RAL 7035)Dimensions (W × H × D): 400 × 500 × 245 mmScope of supplyD+H CPS-P1-040-0202-B central circuit boardLockable plastic housing with keyWired switching power suppliesTerminal blocks for mains connectionWithout rechargeable batteries (rechargeable batteries must be ordered separately)

The D+H RZN 4503-T is a compact smoke and heat extraction push-button control unit with an integrated main control panel and ventilation push-buttons in a robust aluminium housing. With an output of 24 V DC / 3 A, one detector line and one actuator group, it is ideal for compact smoke and heat extraction systems where control unit and operating panel are combined in one device.The unit provides a stabilised output voltage and an integrated emergency power supply for at least 72 hours (battery sold separately). Up to 8 smoke and heat extraction control panels and 14 approved fire detectors can be connected. Temperature-controlled battery charging, circuit monitoring, remote smoke detector reset and night-time smoke extraction functions ensure reliable operation.An optional add-on module enables comfort ventilation with adjustable opening width and ventilation time. Wind or rain sensors, visual and audible alarm devices, and two freely programmable potential-free signal contacts can also be connected.FeaturesSmoke and heat extraction push-button control unit with integrated main control panel24 V DC / 3 A output1 detector line and 1 actuator groupLockable aluminium housing72-hour emergency power supply (battery sold separately)Supports up to 8 control panels and 14 fire detectorsOptional comfort ventilation moduleDirect connection for wind or rain sensorTwo programmable potential-free signal contactsRemote smoke detector reset and night-time smoke extractionCertified to DIN EN 12101-10, ISO 21927-9 and VdS standardsTechnical dataSupply voltage: 230 V AC, 50 HzPower consumption: 100 VAStandby power consumption: < 5 WOutput: 24 V DC / 3 AProtection rating: IP30Ambient temperature: -5 °C to +40 °CHousing: AluminiumColour: Orange (similar to RAL 2011)Dimensions (W × H × D): 156 × 235 × 82 mmScope of supplyD+H RZN 4503-T control unit in flush-mounted aluminium housingLockable door with spare key32-language labelling setWithout battery (must be ordered separately)

The D+H RZN 4503-T Set is a complete smoke and heat exhaust ventilation (RWA) set for the rapid installation of a smoke and heat exhaust ventilation system. It consists of the RWA push-button control unit RZN 4503-T, an RT 45 RWA push-button, the SD-O 371 smoke detector and a Type 8 battery for the integrated 72-hour emergency power supply. All components are perfectly matched to one another and enable quick and safe installation.The RWA push-button control unit features an integrated RWA main control panel and a ventilation push-button within a robust aluminium housing. With an output of 24 V DC / 3 A, a detector loop and a drive unit, the set is ideally suited for smaller smoke and heat extraction systems in public, commercial and industrial buildings.The control unit provides a stabilised output voltage and offers numerous safety and convenience features. These include circuit monitoring for short circuits and open circuits, remote reset of smoke detectors, RWA delayed activation, and connection options for visual and audible alarm devices. An optional wind or rain sensor can be connected directly. In addition, two freely programmable potential-free signal contacts and a slot for an optional add-on module are available.The D+H RZN 4503-T is certified in accordance with ISO 21927-9, DIN EN 12101-10, VdS 2581, VdS 2593, VdS 2344 and the building regulations requirements of DIN 18232-9.FeaturesComplete smoke and heat extraction (RWA) kit with coordinated componentsRWA push-button control unit RZN 4503-T with integrated main control panel and ventilation push-buttonOutput power: 24 V DC / 3 A1 detector line and 1 actuator groupRobust aluminium housing with lockable doorTemperature-controlled battery charging with charge and status indicatorSlot for optional add-on module for comfort ventilationDirect connection of a wind or rain sensorTwo freely programmable potential-free signal contactsIncludes RT 45 smoke and heat alarm push-buttonIncludes SD-O 371 smoke detectorIncludes Type 8 rechargeable battery for 72-hour emergency power supplyTested and certified in accordance with DIN EN 12101-10, ISO 21927-9 and VdSTechnical dataSupply voltage: 230 V AC, 50 HzPower consumption: 100 VAStandby power consumption: < 5 WOutput: 24 V DC / 3 AResidual ripple: < 0.5 mVssMonitoring operating mode: Continuous operationAlarm/ventilation operating mode: Short-term operation (30% duty cycle)Circuits: 1Drive groups: 1Protection rating: IP30Ambient temperature: -5 °C to +40 °CHousing: AluminiumColour: Orange (similar to RAL 2011)Dimensions (W × H × D): 156 × 235 × 82 mmContents of deliveryD+H RZN 4503-T smoke and heat alarm push-button control unitRT 45 smoke and heat alarm push-buttonSD-O 371 smoke detector1 × Type 8 rechargeable batteryLockable flush-mounted aluminium housing with spare keyLabelling set in 32 languagesNote: The smoke and heat extraction set contains all the essential components for installing a single-circuit smoke and heat extraction system. Actuators and other accessories are not included in the scope of delivery and must be ordered separately if required.