GfA Elektromaten Door Control WS900 with 3 Contactors

Coil cord for doors, EstTPU/PP, black, cable configuration: fine-stranded 5x0,25mm²,  Lif9Y11Y, dimensions: left end = 300mm, coil length = 900mm, right end = 2000mm, max. extension length 3,5m   Description: The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf. Properties: Due to the 800mm-long spiral block, the coil cable can be extended to a length of up to 3.5m. The 5-core cable installation and a 0.25mm² conductor cross-section means the helical cable has enough strands for e.g. the safety edge and slack-rope switches Sheath and core insulation made of high-grade materials Can be installed universally on doors from various manufacturers

Coil cord for doors, black, cable configuration: fine-stranded 4x0,25mm², Lif9Y11Y, PP/ TPU Ether, dimensions: left end = 350mm, coil length = 900mm, right end = 2000mm, max. extension length 3,5mDescription:The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf.Properties:Due to the 900mm-long spiral block, the coil cable can be extended to a length of up to 3.5mThe 4-core cable installation and a 0.25mm² conductor cross-section means the coil cord has enough strands for e.g. the safety edge and slack-rope switches.Can be installed universally on doors from various manufacturers

Coil cord for doors, PUR/ PUR, black, cable configuration: fine-stranded 3x0,25mm², Li11Y11Y, dimensions: left end = 90mm, coil length = 620mm, right end = 500mm, max. extension length 2,5mDescription:The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf.Properties:Due to the 620mm-long spiral block, the coil cable can be extended to a length of up to 2.5m.The 3-core cable installation and a 0.25mm² conductor cross-section enables the signal of the optical sensing edge to be transmitted to the door control unit.Sheath and core insulation made of high-grade Polyurethane (PUR)Can be installed universally on doors from various manufacturers

Electrical box with status LED, 90 x 48,5 x 40mm, with 1x M16 cable gland, 1x blind plug and 1x M16 cable gland with bend protectionDescription:The Fraba Vitector small junction box is distinguished by its compact design. The connection circuit board ensures the cables can be easily connected to the door.Further characteristics:90 x 48,5 x 40mm1 x M16 open in the ground1 x pre-shaped for the ground1 x M16 open in the lidIncludes 1 x M16 cable gland, 1 blind plug, and 1 M16 with bend protection

Electrical box with status LED, 40 x 136 x 56 mm, incl. 3x M16 cable glands, 1x M16 cable gland with bend protection and 4x M16 lock nutDescription:The Fraba Vitector large junction box is useful wherever lots of space is needed for cabling from sensors, photo-eye switches, pass-door switches, slack-rope switches, etc. The connection circuit board ensures the cables can be easily connected to the door.Further characteristics:Dimensions: 40 x 136 x 56 mmTransparent coverPre-punched cable entries 5xM16 in the housing, 1xM16 in the lidIncludes 3xM16 cable glands, 1x bend protector and 4 x locknuts

electrical box, 40 x 136 x 56 mm, incl. 3x M16 cable glands, 1x M16 cable gland with bend protection and 4x M16 lock nutDescription:The Fraba Vitector large junction box is useful wherever lots of space is needed for cabling from sensors, photo-eye switches, pass-door switches, slack-rope switches, etc.Further characteristics:Dimensions: 40 x 136 x 56 mmGrey coverPre-punched cable entries 5xM16 in the housing, 1xM16 in the lidIncludes 3xM16 cable glands, 1x bend protector and 4 x locknuts

Electrical box, 90 x 48,5 x 40mm, with 1x M16 cable gland, 1x blind plug and 1x M16 cable gland with bend protectionDescription:The Fraba Vitector small junction box is distinguished by its compact design.Further characteristics:90 x 48,5 x 40mm1 x M16 open in the ground1 x pre-shaped for the ground1 x M16 open in the lidIncludes 1 x M16 cable gland, 1 blind plug, and 1 M16 with bend protection and terminal strip

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, with Diagnose-LED, PVC-cable, cable length 6,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6701 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 6.5 m and receiver - 0.5 m). Through an LED at the back of the transmitter, the operating status of the sensing edge is always clearly visible. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 6,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6501 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 6.5 m and receiver - 0.5m). The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, with Diagnose-LED, PVC-cable, cable length 0,5m/0,5m, with Molex-plugsDescription:The FRABA VITECTOR OSE-S 6800 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 0.5 m and receiver - 0.5 m) and pre-assembled GfA plugs. Through an LED at the back of the transmitter, the operating status of the sensing edge is always clearly visible. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 0,5m/0,5m, with Molex-plugsDescription:The FRABA VITECTOR OSE-S 6600 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 0.5 m and receiver - 0.5 m) and pre-assembled GfA plugs. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, with Diagnose-LED, PVC-cable, cable length 10,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6702 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 10.5 m and receiver - 0.5 m). Through an LED at the back of the transmitter, the operating status of the sensing edge is always clearly visible. The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 10,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6502 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 10.5 m and receiver - 0.5m). The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Motor cable for GfA Elektromaten drives with digital limit switch DES, length 7m

Motor cable for GfA Elektromaten drives with digital limit switch DES, length 5m

Control unit for optical sensing edges OSE or 8k2 resistive edges, relay output (stop, reverse and cable tension switch), monitors up to 2 sensing edges, IP65 enclosure, supply voltage 24 V AC/DC, rated Cat. 3 PL d (EN 13849-1)Description:The FRABA VITECTOR OSE-C 2324 is a control unit for optical sensing edges on doors. The control unit can monitor and evaluate both optical sensing edges (type FRABA VITECTOR OSE) and resistant sensing edges with a terminal resistance of 8k2 Ohm. Besides this, a stop circuit (e.g. slack-rope switch and pass-door switch) can be monitored with this device.Several relay outputs (stop reverse and slack-rope switch, pass-door switch)Monitors up to 2 OSE or 8k2 safety edgesHousing unit protection class: IP65Supply voltage: 24 V AC/DCSafety category: Cat.3 PL according to EN13849-1

Control unit for optical sensing edges OSE, relay output (stop and reverse), monitors up to 2 sensing edges, supply voltage 24 V DC, rated Cat. 3 PL c (EN 13849-1)Description:The FRABA VITECTOR OSE-C 2301 is a control unit for optical sensing edges on doors. The control unit can monitor and evaluate up to two optical sensing edges type (FRABA VITECTOR OSE) or two pull-in protection devices (type FRABA VITECTOR RAYTECTOR). Thereby, the security signal of the sensors can be converted via the evaluation of the OSE-C 2300 into a potential-free NC relay contact. As well as the safety output, the OSE-C2301 also delivers a NO relay contact which e.g. can be used to reverse the door when operating the safety edge.Several relay outputs (stop and reverse)Monitors up to 2 OSE sensing edges or pull-in protection devicesHousing unit protection class: IP65Supply voltage: 24V DCSafety category: Cat.3 PL according to EN13849-1