Sensors
Door sensors play a crucial role in the automation of door systems and the safety of door operation. These sensors are placed on industrial doors to ensure precise control, safe movement and effective safety mechanisms.
Safety sensors
A key element are sensors for obstacle detection or presence detection, which are used to prevent collisions with objects or people. These sensors are often equipped with advanced technologies such as infrared, ultrasound or radar and enable the door opening to be monitored. These include safety edges, Light curtains, photo eyes, Area scanners or modern 3D laser scanner systems. As soon as an obstacle is detected, the sensor sends a corresponding signal to the door control unit, which stops or changes the door movement to prevent potential damage.
Activation sensors
Activation sensors are used to automate door movement and optimise the integration of the door into goods flow processes. These sensors detect an approaching object, such as a forklift truck or lorry, and open or close doors as required at the right time. Particularly worth mentioning here are radar detectors, induction loops or IR sensors.
The integration of sensor technology in industrial doors not only contributes to safety, but also enables efficient and precise control of door operation.
Rubber profile for optical sensing edges, coil of 10m, material EPDM
Hormann Art. Nr. 4991303, Radar presence detector Comfort mini, mounting height 2,0 - 3,5 m
Rubber profile for optical sensing edges, coil of 10m, material EPDM
Hormann Art. Nr. 4548367, Optical sensors double SKS, 1500 mm connection cable, left (white), produced from 01.07.2011 -
combined motion and presence detector, black supply voltage 11.5-32 V DC
Hormann Art. Nr. 4991932, Scanprotect; Note: Order the connection cable or connecting cable separately.
Receiver for wireless signal transmission system , for 8k2 safety edgesDescription:The ELMON wicom 81-463 R by ASO Safety is a receiver for the wireless transmission system for 8k2 safety edges ELMON wicom, mounting on the door profile.Technical properties:• Supply voltage 12-24 V DC• Surface-mounted housing
Active Infrared Sensor for presence detection, 2 IR-curtains (2 x 24 Active IR spots) to monitor an area in front of the door, adjustable via LCD-Display or remote (separate accessory), max. installation height 3,5mDescription:The IXIO-SO1 is suitable for the protection of automatic sliding doorsProperties:Protection: 2 active-IR curtains (2 x 24 AIR-Spots)Configuration via LCD-display or remote control4 visible spots on the floor for easy setupMax. installation height: 3.5m
Signal processing unit for OSE, stop, reverse, and monitoring of the slack-rope switch, safety category 1, 24 V DC, wall-mounted housing IP65, 130 x 94 x 60 mm (LxWxH), cable gland 2 x PG11, 1 x PG11 bend protectionDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Signal processing unit for OSE, stop, reverse, and monitoring of the slack-rope switch, safety category 1, 230V AC, wall-mounted housing IP65, 130 x 94 x 60 mm (LxWxH), cable gland 2 x PG11, 1 x PG11 bend protectionDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Signal processing unit for OSE, stop, reverse, and monitoring of the slack-rope switch, safety category 1, 24 V DC, wall-mounted housing IP65, 130 x 94 x 60 mm (LxWxH), cable gland 2 x PG11, 1 x PG11 bend protectionDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Set of Laser Scanner with protective cover in grey (RAL7031), scanner for presence detection on doors or barrier arms: complete coverage over 4 planes (16560 measurements per second), adjustable via remote control (separate accessory), IP65 rated, 2 output signals, dynamic teach-in, max. range 9,9m x 9,9m, can fulfil requirements of a type-E device according to EN 12453, PL "d"Description:The BEA LZR®-I100 is a sensor for monitoring the closing plane of the door and is certified as a type E device with presence detection according to the EN12453 certification. The sensor functions on time-of-flight technology which enables precise recognition of even the smallest object. The LZR generates laser beams in 4 detection planes to monitor both the closing plane of the door and the area in front it. BEA designed the LZR I100 for industrial environments and can also ensure larger industrial doors are secured thanks to its detection field of up to 9.9m x 9.9m. Together with the BEA LZR Laser Scanner protective cover, the set is ideally suited for first installations or for retrofitting on existing barrier systems. The scanner is secured in the protective cover and can be easily installed.Details of the LZR-I100:Maximum range 9.9m x 9.9mDepending on the installation height, monitors up to 1m upon approach of the doorEN ISO 13849-1 PL d/CAT 2 and EN 12453 type E certifiedContactless protection of industrial doorsEasy setup and retrofitting of existing facilitiesProtection upon approach and departure (roll-up safety)Up to 2 virtual pushbuttons for opening doorsFilters external interference (door vibrations, snow, rain...)IP 65 protection classThrough the separate use of a universal remote control, it is possible to set up and adjust the sensors from the ground.Details of the protective cover for the BEA LZR laser scanner:The protective cover for the BEA LZR Laser scanner was developed as an accessory for the BEA LZR sensor range. The protective cover is made of a 2.5mm-thick Aluminium sheet and is used protect the sensor and to make the installation inconspicuous. Thanks to its pure grey powder coating, similar to RAL7031, the protective cover can fit in with any installation environment. Other RAL colours are also available upon request. The protective cover can be mounted either on the appropriate mounting holes on masonry, barrier housing, etc... or with the help of a mounting bracket, sold separately. The LZR Sensor does not come with the cover and must be ordered separately.Compatible with BEA LZR H-100, LZR-i100 and LZR-i110Powder coating in pure grey, similar to RAL7031Anticorrosive thanks to aluminium sheetVersatile installation options
Safety sensor for doors and windows, 1 x Laser-Scanner (left-hand installation), complete monitoring of the detection zone (70 laser points) and the pinch zone (100 laser points), max. range 4mDescription:The BEA LZR® FLATSCAN SW uses laser technology time-of-flight measurement) to monitor automatic swing doors. Full protection of the doors is guaranteed by 170 measurement points. One single FLATSCAN SW Module is enough to secure the entire door wing as well as the hinge and the area directly to the side of the closing edge.The LZR FLATSCAN can be used for monitoring as a pair (e.g. in swing doors), or as a single sensor (e.g. in windows). Properties:Maximum detection range of 4m (diagonal) with reflectivity of 2% (i.e. at 1.5m -> max. H = 3.7 m).Possible monitoring of the closing edgeCompact design (8.5 cm x 14.2 cm), can be integrated into any doorWorks with all floor types ((slatted floors, wire mesh, absorbent carpets, reflective flooring, slippery surfaces, etc.) and with the doors' surroundings (handrails, walls, radiators, dustbins, etc).One module per side is enough to secure the door wings as well as its hinges.Useable as a pair (i.e. for doors) or on its own (i.e. for windows).
Signal processing unit for OSE, stop, reverse, and monitoring of the slack-rope switch, safety category 1, 230V AC, wall-mounted housing IP65, 130 x 94 x 60 mm (LxWxH), cable gland 2 x PG11, 1 x PG11 bend protectionDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Plug with 0,5m cable, lock cap, fixation clips and end capDescription:The end cap set KS 4 L0.5 30.70 by ASO Safety is used to assemble SENTIR SE 30.70 type sensing edges. The set comes assembled with 0,5m cable. The set includes:Plug with cableLock capFixation clipsEnd cap
Rubber profile for optical sensing edges, coil of 50m, material EPDM
Rubber profile for optical sensing edges, coil of 10m, material NBR
Rubber profile for optical sensing edges, coil of 5m, material EPDM
Hormann Art. Nr. 638377, pre-travelling light barrier VL2 with protective cover, transmitter inside left for VL 2; Note: For VL 2 before July 2007 you have to exchange transmitter and receiver, not compatible with transmitter or receiver VL1-LE - not compatible with radio connection cable - Marking: black connection cable, production period 01.11.2005 - 31.12.2018
Radar motion detector for opening and reversing of doorsDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Plug with 0,5m cable, lock cap, fixation clips and end capDescription:The end cap set KS 4 L0.5 35.55 by ASO Safety is used to assemble SENTIR SE 35.55 type sensing edges. The set comes assembled with 0,5m cable. The set includes:Plug with cableLock capFixation clipsEnd cap
Rubber profile for optical sensing edges, coil of 10m, material EPDM
Rubber profile for optical sensing edges, coil of 5m, material EPDM
Signal processing unit for OSE, stop, reverse, and monitoring of the slack-rope switch, safety category 1, 24 V DC, wall-mounted housing IP65, 130 x 94 x 60 mm (LxWxH), cable gland 2 x PG11, 1 x PG11 bend protectionDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Sicherheitssensoren
Ein zentrales Element sind Sensoren zur Hinderniserkennung oder Anwesenheitserfassung, die dazu dienen, Kollisionen mit Objekten oder Personen zu verhindern. Diese Sensoren sind oft mit fortschrittlichen Technologien wie Infrarot, Ultraschall oder Radar ausgestattet und ermöglichen eine Überwachung der Toröffnung. Hierzu gehören Schaltleisten, Lichtgitter, Lichtschranken, Bereichsscanner oder moderne 3D-Laserscanner-Systeme. Sobald ein Hindernis erkannt wird, gibt der Sensor ein entsprechendes Signal an die Torsteuerung und diese stoppt oder ändert die Torbewegung, um potenzielle Schäden zu vermeiden.
Aktivierungssensoren
Zur Automatisierung der Torbewegung und optimale Einbindung des Tores in Warenflussprozesse, werden Aktivierungssensoren eingesetzt. Diese Sensoren erkennen ein such näherndes Objekt, wie z.B. einen Gabelstapler oder LKW und Öffnen oder Schließen Tore bedarfsgerecht zum richtigen Zeitpunkt. Besonders zu erwähnen sind hier Radarmelder, Induktionsschleifen oder IR-Sensoren.
Die Integration von Sensortechnologie in Industrietore trägt nicht nur zur Sicherheit bei, sondern ermöglicht auch eine effiziente und präzise Steuerung des Torbetriebs.